I beleive it depends on the version of IOS you are running.

I was able to get some stats from ATM interfaces at my last job, but
I don't have access to any of the data, or I could tell you for sure.

I know that I used snmpwalks of 1.3.6.1.2.1.31.1.1.1.18, 1.3.6.1.2.1.2.2.1.3,
and 1.3.6.1.2.1.2.2.1.5, to get my info.  Those are ifdescr, iftype, and
ifspeed.  where type 37 is atm, and type 49 is aal5, and type 134 is the
atm sub interface.

I don't know if that will help.

-Tim

On Fri Nov 10, 2000 at 10:36:09AM -0600, Luis Carlos Solano wrote:
> 
> Wang Chen escribió:
> 
> > Is there anybody successfully monitoring Cisco router ATM sub-interface at sub-if level.
> > I have the output from aal5, but sub-if. We would like to monitoring trafic of ATM sub-interface at
> > subif. Form mrtg.conf,  we've got nosuchname error of SNMP. I realize the MIB entry may not
> > there. The error like following:
> 
> I think is not possible, I have the same problem. For example, I vahe some Access servers conected via an ATM
> PVC, (ex: 4/0/0.5) but the MIBS I can get are just for "the whole"  4/0. I did solve the problem "watching" the
> traffic at mi AS interface.
> 
> lc.
> 
> 
> --
> Unsubscribe mailto:mrtg-request@list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 
--
Timothy Kennedy
Network Operations Manager
YellowBrix, Inc.
tkennedy@yellowbrix.com
Cell: 703-216-5957

-- Binary/unsupported file stripped by Listar --
-- Err : No filename to use for decode, file stripped.
-- Type: application/pgp-signature


--
Unsubscribe mailto:mrtg-request@list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi