Hi All,<br><br>We have a Palo Alto 200 firewall device in our WAN routing setup. Along with the firewall features it provides, the device is also used to establish two ipsec-based VPN tunnels (using two different WAN links) to our HQ office located at a remote location. I have limited access to this device and all I know about it is it's SNMP read-only community string and it's IP address. I also know that the interface names for the two tunnels are tunnel.1 and tunnel.4 and the IP addresses used for the tunnel interfaces are 10.<a.b>.2 and 10.<c.d>.2 respectively. When I try to create a cfg file using the<br>
"/usr/bin/cfgmaker --output=/etc/mrtg/paloalto.cfg --global 'workdir: /var/www/mrtg' -ifref=eth --global 'options[_]: growright,bits' --snmp-options=:::::2 <comm_string>@<device_ip> " command on my MRTG host, the cfg file I get doesn't list out any of the tunnel interfaces. <br>
<br>I also tried using a few other "--ifref=" options mentioned in the cfgmaker man-page but neither of those options seems to work. I would be thankful if I get some pointers/suggestions about how I can configure MRTG to monitor the tunnel interfaces.<br>
<br>Thanks in advance,<br>Yogesh Hasabnis<br>