[rrd-developers] Re: symbol __sincos: referenced symbol not found

Birudaraju, Srinivasa Raju bsraju at corp.untd.com
Wed Nov 23 08:10:37 MET 2005


ok..I'll try this installation on same kind of hardware at my premises and see how it goes. I shall get back to you if any..

thanks
Srinivas

-----Original Message-----
From: Mulley, Nikhil [mailto:Nikhil.Mulley at deshaw.com]
Sent: Wednesday, November 23, 2005 12:35 PM
To: Birudaraju, Srinivasa Raju; rrd-developers at list.ee.ethz.ch
Subject: RE: [rrd-developers] symbol __sincos: referenced symbol not
found


Oh.. Thank you for responding, Sir.

I am compiling new RRDToolv1.2.11 on a sparc (Solaris 8) machine.  I am
just looking for some resolutions of the problem that I have reported
:). However, the same version source were successfully installed under
Solaris-10(x86) and Linux(x86) succesfully and I am able to run the
scripts easily.
I was just trying to figure it out if there were any gotchas hidden in
the build process under sparc.I also noticed that the symbol "__sincos"
was from libart_lgpl library.(Please see the other thread which I have
sent).

I followed this link
http://people.ee.ethz.ch/~oetiker/webtools/rrdtool/doc/rrdbuild.en.html
as template structure to build the RRDTool, though I cannot say
thoroughly that I followed the exact procedures .

Regards.
Nikhil

-----Original Message-----
From: Birudaraju, Srinivasa Raju [mailto:bsraju at corp.untd.com] 
Sent: Wednesday, November 23, 2005 12:28 PM
To: Mulley, Nikhil; rrd-developers at list.ee.ethz.ch
Subject: RE: [rrd-developers] symbol __sincos: referenced symbol not
found

Mr. Nikhil,

What is that you're looking for ?? (or) you're just trying to evaluate
the tools??

-Srinivas

-----Original Message-----
From: rrd-developers-bounce at list.ee.ethz.ch
[mailto:rrd-developers-bounce at list.ee.ethz.ch]On Behalf Of Mulley,
Nikhil
Sent: Wednesday, November 23, 2005 11:37 AM
To: rrd-developers at list.ee.ethz.ch
Subject: [rrd-developers] symbol __sincos: referenced symbol not found


Hello

I am facing some problems with the scripts under new RRDTool . I have
installed the new RRDTool-1.2.11 under my system and used the following
library versions.

Compiler : Studio-10
Platform : Sparc
Libart   : libart-2.0
Freetype : freetype2
Cgilib   : cgilib v0.5
Zlib     : libz.1.1.4 

When I run the sample script provided in the RRD package, for example
stripes.pl. I get the following error :

me at server:/u/me/work/mrtg>
/usr/local/rrdtool-1.2.11/share/rrdtool/examples/stripes.pl
ld.so.1: stripes.pl: fatal: relocation error: file
/usr/local/rrdtool-1.2.11/lib/librrd.so.2: symbol __sincos: referenced
symbol not found
Killed
me at server:/u/me/work/mrtg>
me at server:/u/me/work/mrtg> ldd /usr/local/rrdtool-1.2.11/lib/librrd.so.2
        libfreetype.so.6 =>      /usr/local/lib/libfreetype.so.6
        libpng.so.3 =>   /usr/local/lib/libpng.so.3
        libz.so =>       /usr/local/lib/libz.so
        libart_lgpl_2.so.2 =>    /usr/local/lib/libart_lgpl_2.so.2
        libm.so.1 =>     /usr/lib/libm.so.1
        libc.so.1 =>     /usr/lib/libc.so.1
        libdl.so.1 =>    /usr/lib/libdl.so.1
        /usr/platform/SUNW,Sun-Fire-280R/lib/libc_psr.so.1
me at server:/u/me/work/mrtg>

Can some one please suggest what could have went wrong ? I suspect this
could be due to some bad build process.

Thanks,
Nikhil



--
Unsubscribe
mailto:rrd-developers-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:rrd-developers-request at list.ee.ethz.ch?subject=help
Archive     http://lists.ee.ethz.ch/rrd-developers
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi



--
Unsubscribe mailto:rrd-developers-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:rrd-developers-request at list.ee.ethz.ch?subject=help
Archive     http://lists.ee.ethz.ch/rrd-developers
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi



More information about the rrd-developers mailing list