[rrd-users] Re: QOS Help

[Cassie Bezuidenhout]

Can someone please put me in the right direction...

I manage to get all the right values but my results looks something like
this...

$Value1			$Value2
jhbfdx1interlocq 		3752568281
jhbfdx1interlocq 		3752042674
jhbfdx1interlocq 		1901157205
jhbfdx1interlocq 		1899725097
jhbvolinterlocq 		1586152685
jhbvolinterlocq 		1583119059
jhbvolinterlocq 		2706518142
jhbvolinterlocq 		2706787396

I need to add the second values up when the first values are the same to
pass onto my RRD. Any idea how to do this with perl

 
Thanks
Cassie Bezuidenhout



-----Original Message-----
From: Warnes, Jason SktnHR [mailto:jason.warnes at saskatoonhealthregion.ca] 
Sent: 23 December 2003 07:55
To: 'Cassie Bezuidenhout'; rrd-users at list.ee.ethz.ch
Subject: RE: [rrd-users] QOS Help

I'm doing something similar for examining octets on multiple routers and I
have the same worry.  I've been working on forking a new process for each
device and that would solve the problem, but its not working yet.  Mind you
if you have a lot of devices you could be looking at quite a few child
processes which might chew up quite a bit of RAM.

If I get mine done and working I'll make sure to contact you, but my
programming time is pretty tight lately so if your Perl is up to it try that
idea.

Jason...

-----Original Message-----
From: Cassie Bezuidenhout [mailto:cassieb at ifusion.co.za] 
Sent: Thursday, December 18, 2003 11:50 PM
To: rrd-users at list.ee.ethz.ch
Subject: [rrd-users] QOS Help


Content-Type: text/plain
Hi All
 
I created the attached script to pull information from our internet router
to get values for passing through to RRD. In principal it works but it is
extremely slow and I am a bit worried about the order. I need the script to
complete both walks before moving on to the second device as the same values
might appear. Currently the attached script walks through and gives me the
results, but it is taking far too long.
 
Any help would be much appreciated....
 
 
 
#!/usr/local/lib/perl
BEGIN {
open (STDERR, ">/usr/local/nmis/cbwfq/error.txt");
}
 
 
use lib "/usr/local/nmis/lib";
use SNMP::Util;
 
$SNMP::Util::Max_log_level = 'debug';
use BER;
#use SNMP_util "0.90";
use SNMP_util;
 
$BER::pretty_print_timeticks = 0;       # Uptime in absolute value
 
@IP_array = ('my-ip-one',' my-ip-two ',' my-ip-three '); $community =
'my-community';
 
$first = '1.3.6.1.4.1.9.9.166.1.7.1.1.1';
$second = '1.3.6.1.4.1.9.9.166.1.5.1.1.2';
 
foreach $IP (@IP_array) {
@Config1 = (&snmpwalk("$community\@$IP", $first));
 
        foreach $Config1 (@Config1)     {
        ($oid1, $Config1) = split(':', $Config1, 2);
#       print "$oid1 = $Config1\n";
 
@Config2 = (&snmpwalk("$community\@$IP", $second));
        foreach $Config2 (@Config2)     {
        ($oid2, $Config2) = split(':', $Config2, 2);
#       print "$oid2 = $Config2\n";
 
 
if ($oid1 == $Config2) {
print "$Config1 = $oid2\n";
}
}
                                        }
                                        } 
Cassie Bezuidenhout

* +27 11 256-0531                    
* +27 83 677 0767
* cassieb at ifusion.co.za
 
 



-- Attached file removed by Ecartis and put at URL below --
-- Type: image/jpeg
-- Size: 3k (4088 bytes)
-- URL : http://www.ee.ethz.ch/~slist/p/11-image001.jpg


-- Attached file removed by Ecartis and put at URL below --
-- Type: image/jpeg
-- Size: 2k (3024 bytes)
-- URL : http://www.ee.ethz.ch/~slist/p/02-image002.jpg


--
Unsubscribe mailto:rrd-users-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:rrd-users-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:rrd-users-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:rrd-users-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi