[rrd-users] 500 Server Error in Apache

Mon Aug 13 18:55:05 CEST 2007

Yes they all have the same permissions. Is there anyway to see what
version of rrdcgi I am running just to verify? I tried -v, -V,
--version, none seem to work.

Kade

On 8/13/07, Geoff Garside <geoff.garside at openhosting.co.uk> wrote:
> Permissions on the related RRDs on those lines all kosher?
>
> Geoff
>
> On 13 Aug 2007, at 16:52, Kade Cole wrote:
>
> > I tried all of the above. Still have the same problem. If I remove
> > some of the lines it will start to work. eg.
> >
> >    DEF:AP462101=/usr/local/www/MRTG/WIRELESSAP/evergreen/clients-
> > ap-46.2.10.rrd:ds0:AVERAGE
> > --- remove above line and all lines to and including ---
> > GPRINT:AP46213:MAX:%2.0lf
> >
> > Kade
> >
> > On 8/13/07, Geoff Garside <geoff.garside at openhosting.co.uk> wrote:
> >> When you removed the space was it to change it from
> >>
> >>         #! /usr/local/bin/rrdcgi
> >>
> >>         <HTML>
> >>
> >> to
> >>
> >>         #!/usr/local/bin/rrdcgi
> >>
> >>         <HTML>
> >>
> >> or
> >>
> >>         #! /usr/local/bin/rrdcgi
> >>         <HTML>
> >>
> >> or both?
> >>
> >> Geoff
> >>
> >> On 13 Aug 2007, at 16:05, Kade Cole wrote:
> >>
> >>> I tried without the space. That did not help. I also tried
> >>> running on
> >>> the command line but I am unable to figure that out. All it says is
> >>> (offline mode: enter name=value pairs on standard input). Then it
> >>> just
> >>> hangs. I tried pasting in the following line:
> >>>    DEF:AP46111=/usr/local/www/MRTG/WIRELESSAP/main/clients-
> >>> ap-46.1.1.rrd:ds0:AVERAGE
> >>>    DEF:AP46112=/usr/local/www/MRTG/WIRELESSAP/main/clients-
> >>> ap-46.1.1.rrd:ds1:AVERAGE
> >>>   CDEF:AP4611=AP46111,AP46112,+
> >>>  LINE1:AP4611#003300:46.1.1
> >>> GPRINT:AP4611:LAST:%2.0lf
> >>> GPRINT:AP4611:MAX:%2.0lf
> >>> But then I get a seg fault. Thanks.
> >>>
> >>> Kade
> >>>
> >>> On 8/13/07, Geoff Garside <geoff.garside at openhosting.co.uk> wrote:
> >>>> On 13 Aug 2007, at 15:38, Kade Cole wrote:
> >>>>
> >>>>> Sorry should have included that in the first email:
> >>>>> [Mon Aug 13 09:37:26 2007] [error] [client X.X.X.X] Premature
> >>>>> end of
> >>>>> script headers: wireless-buildings-rrd.cgi
> >>>>>
> >>>>> Kade
> >>>>>
> >>>>> On 8/13/07, Geoff Garside <geoff.garside at openhosting.co.uk> wrote:
> >>>>>>
> >>>>>> On 13 Aug 2007, at 15:26, Kade Cole wrote:
> >>>>>>
> >>>>>>> I have the following config file that I am having trouble
> >>>>>>> getting to
> >>>>>>> work with rrdcgi. It will not load the page. I get a 500
> >>>>>>> Internal
> >>>>>>> Server Error with Apache/2.0.59 running on FreeBSD 6.2. It will
> >>>>>>> run
> >>>>>>> fine if I cut some of the variables or CDEFs out. I was
> >>>>>>> wondering if
> >>>>>>> anyone had any ideas what the problem might be. I have tried
> >>>>>>> rrdtool-1.0.50  and rrdtool-1.2.23. Thanks.
> >>>>>>>
> >>>>>> <snip>
> >>>>>>
> >>>>>> What is Apache writing to your /var/log/httpd-error.log file?
> >>>>>>
> >>>>>> Geoff
> >>>>
> >>>> Maybe try removing the first space after the #! in your .cgi file?
> >>>> What happens if you just run the file through rrdcgi on the command
> >>>> line, what do you get as the headers there?
> >>>>
> >>>> Geoff
> >>
>
>