[rrd-users] ubuntu server install

[Shon Hender]

That seems to have done it!  MUCH THANKS!
-Shon

-----Original Message-----
From: Matthew M. Boedicker [mailto:matthewm at boedicker.org] 
Sent: Saturday, April 19, 2008 12:45 PM
To: Shon Hender; rrd-users at lists.oetiker.ch
Subject: Re: [rrd-users] ubuntu server install

Try:

CPPFLAGS="-I/usr/local/include -I/usr/local/include/libart-2.0
-I/usr/local/include/freetype2" LDFLAGS=-L/usr/local/lib ./configure

On Sat, Apr 19, 2008 at 01:54:04AM -0600, Shon Hender wrote:
> Getting closer...
> 
> Now I get this error (and yes libart is installed in /usr/local):
> 
> I could not find a working copy of libart-2.0. Check config.log for hints
on
> why this is the case. Maybe you need to set LDFLAGS and CPPFLAGS
> appropriately so that compiler and the linker can find libart_lgpl_2 and
its
> header files. If you have not installed libart-2.0, you can get it either
> from its original home on
> 
>      ftp://ftp.gnome.org/pub/GNOME/sources/libart_lgpl/2.3/
> 
>   You can find also find an archive copy on
> 
>      http://oss.oetiker.ch/rrdtool/pub/libs
> 
>   The last tested version of libart-2.0 is 2.3.17.
> 
>        LIBS=-lm 
>    LDFLAGS=-L/usr/local/lib
>   CPPFLAGS=-I/usr/local/include -I/usr/local/include/freetype2
> -I/usr/include/libart-2.0
> 
> -----Original Message-----
> From: Matthew M. Boedicker [mailto:matthewm at boedicker.org] 
> Sent: Friday, April 18, 2008 5:46 PM
> To: Shon Hender; rrd-users at lists.oetiker.ch
> Subject: Re: [rrd-users] ubuntu server install
> 
> Try it all on one line without the backslashes:
> 
> CPPFLAGS="-I/usr/local/include -I/usr/local/include/freetype2"
> LDFLAGS=-L/usr/local/lib ./configure
> 
> On Fri, Apr 18, 2008 at 03:23:15PM -0600, Shon Hender wrote:
> > Yes, it is in /usr/local/, but that did not work.
> > 
> > I'm getting the following error when I run the command below:
> > 
> > -bash:  LDFLAGS=-L/usr/local/lib: No such file or directory
> > 
> > 
> > 
> > -----Original Message-----
> > From: Matthew M. Boedicker [mailto:matthewm at boedicker.org] 
> > Sent: Friday, April 18, 2008 3:11 PM
> > To: rrd-users at lists.oetiker.ch
> > Subject: Re: [rrd-users] ubuntu server install
> > 
> > Where did you install freetype2? If it's in /usr/local/ try something
> like:
> > 
> > CPPFLAGS="-I/usr/local/include -I/usr/local/include/freetype2" \
> > LDFLAGS=-L/usr/local/lib \
> > ./configure
> > 
> > On Fri, Apr 18, 2008 at 02:24:52PM -0600, Shon Hender wrote:
> > > I've installed freetype2 from source but I keep getting this same
error:
> > > Any suggestions?
> > > 
> > >  
> > > 
> > > * I could not find a working copy of freetype2. Check config.log for
> hints
> > > on wy
> > > 
> > >   this is the case. Maybe you need to set LDFLAGS and CPPFLAGS
> > appropriately
> > > 
> > >   so that compiler and the linker can find libfreetype and its header
> > files.
> > > If
> > > 
> > >   you have not installed freetype2, you can get it either from its
> > original
> > > homn
> > > 
> > >  
> > > 
> > >      http://prdownloads.sourceforge.net/freetype/
> > > 
> > >  
> > > 
> > >   You can find also find an archive copy on
> > > 
> > >  
> > > 
> > >      http://oss.oetiker.ch/rrdtool/pub/libs
> > > 
> > >  
> > > 
> > >   The last tested version of freetype2 is 2.1.10.
> > > 
> > >  
> > > 
> > >        LIBS=-lm 
> > > 
> > >    LDFLAGS=
> > > 
> > >   CPPFLAGS= -I/usr/include/freetype2
> > > 
> > >  
> > > 
> > >
> >
>
----------------------------------------------------------------------------
> > > 
> > >                 
> > > 
> > > configure: error: Please fix the library issues listed above and try
> > again.
> > > 
> > >  
> > > 
> > > Thanks,
> > > 
> > > -Shon
> > > 
> > 
> > > _______________________________________________
> > > rrd-users mailing list
> > > rrd-users at lists.oetiker.ch
> > > https://lists.oetiker.ch/cgi-bin/listinfo/rrd-users