[rrd-users] RHEL6 - rrdtool dumping text

Joe Loiacono jloiacon at csc.com
Sat Aug 10 22:30:24 CEST 2013


Yes, I've had no problems with it on a previous install. But I built that
one vs RPM'ing this one (however, that may be irrelevant).

flowviewerprime /var/www/cgi-bin/FlowViewer_4.2/Flow_Working 299
>/opt/rrdtool-1.4.7/bin/rrdtool
update /var/www/cgi-bin/FlowTracker_Files/FlowTracker_RRDtool/somerville_test.rrd
 1376163000:6886391
prep ds[0]     last_arg 'U'     this_arg '6886391' pdp_new 2038371736.00
proc_pdp_age 4 proc_pdp_st 1376162700  occu_pfp_age 0   occu_pdp_st
1376163000  int 296.000000  pre_int 296.000000      post_int 0.000000
PDP UPD ds[0]  elapsed_pdp_st 1 pdp_temp 6886391.00     new_prep       0.00
new_unkn_sec     0
schedule CDP_val update, RRA 2 DS 0, DNAN
Initialize CDP_val for RRA 2 DS 0: 6886391.00
schedule CDP_val update, RRA 3 DS 0, DNAN
Initialize CDP_val for RRA 3 DS 0: 6886391.00
schedule CDP_val update, RRA 6 DS 0, DNAN
Initialize CDP_val for RRA 6 DS 0: 6886391.00
schedule CDP_val update, RRA 7 DS 0, DNAN
Initialize CDP_val for RRA 7 DS 0: 6886391.00
  -- RRA Preseek 2040
  -- RRA Postseek 3864
  -- RRA WRITE VALUE 6.886391e+06, at 3864 CF:AVERAGE
  -- RRA Preseek 3872
  -- RRA Postseek 9624
  -- RRA WRITE VALUE -nan, at 9624 CF:AVERAGE
  -- RRA Preseek 9632
  -- RRA Postseek 32224
  -- RRA WRITE VALUE 6.886391e+06, at 32224 CF:MAX
  -- RRA Preseek 32232
  -- RRA Postseek 32992
  -- RRA WRITE VALUE -nan, at 32992 CF:MAX

Joe



From:	Eric Schoeller <eschoeller at users.sourceforge.net>
To:	rrd-users at lists.oetiker.ch
Date:	08/10/2013 04:27 PM
Subject:	Re: [rrd-users] RHEL6 - rrdtool dumping text
Sent by:	rrd-users-bounces+jloiacon=csc.com at lists.oetiker.ch



What does the debug text look like? What specific command are you running
to trigger the text? We're running rrdtool-1.4.7 on RHEL6 over here with no
strange behavior.

Eric Schoeller
University of Colorado Boulder
Office of Information Technology

On 08/10/13 14:18, Joe Loiacono wrote:


      It seems to be working OK ... but it keeps dumping what looks like
      debug text. Any known problem? Is there a switch?

      Used these two RPMs:

      perl-rrdtool-1.4.7-1.el6.rfx.x86_64.rpm
      rrdtool-1.4.7-1.el6.wrl.x86_64.rpm

      Thanks,

      Joe Loiacono




      _______________________________________________
      rrd-users mailing list
      rrd-users at lists.oetiker.ch
      https://lists.oetiker.ch/cgi-bin/listinfo/rrd-users

_______________________________________________
rrd-users mailing list
rrd-users at lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/rrd-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/rrd-users/attachments/20130810/2cf6a428/attachment-0001.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: graycol.gif
Type: image/gif
Size: 105 bytes
Desc: not available
Url : http://lists.oetiker.ch/pipermail/rrd-users/attachments/20130810/2cf6a428/attachment-0001.gif 


More information about the rrd-users mailing list