[smokeping-users] Re: Smokeping

[Greg Reaume]

Thank you kindly, problem solved.  :)

I had everything EXCEPT the binary path in the
/usr/local/smokeping-1.7/lib/probes/FPing.pm.  That was one placed I
hadn't checked.

Greg Reaume

Network Analyst
Cowan Dalton Inc 


-----Original Message-----
From: Adrian Bool [mailto:aid at vianw.net] 
Sent: April 23, 2002 4:46 AM
To: Greg Reaume
Cc: ranwar at indo.com; Smokeping Users List
Subject: Re: [smokeping-users] Re: Smokeping



Hi Greg,

I had something similar.  There were two things that I needed to do in
order to get smokeping running - perhaps one or two of them may help
you...

Firstly, I needed to set the fping binary setuid, something like,

 chown root  /usr/local/sbin/fping
 chmod u+s /usr/local/sbin/fping

Secondly, I needed to alter the path to fping in the file,

 /opt/smokeping-1.6/lib/probes/FPing.pm

Naturally, that file will probably be in a slighly different position o 
your system..

Just near the top you will see,

 *** Probes ***
 + FPing
 binary = /usr/local/sbin/fping

Make sure the binary line points to your real fping - there was some 
really strange path in there until I updated mine to above.

Good luck,

aid
 


On Mon, 22 Apr 2002, Greg Reaume wrote:

> No I haven't had a response yet but numerous off-list e-mails asking 
> me to share the solution when I eventually get it.
> 
> It seems to me that this is not a problem only we are experiencing 
> (reference thread 'Upgrading from') so I expect there should be 
> someone with a solution shortly.
> 
> 
> Note:  I've attached my original post as well as the 'Upgrading from' 
> thread and cc'd this response for the benefit of the list.
> 
> Greg Reaume
> 
> Network Analyst
> Cowan Dalton Inc
> 
> 
> -----Original Message-----
> From: Reza Anwar [mailto:ranwar at indo.com]
> Sent: April 22, 2002 8:14 PM
> To: greg at reaume.name
> Subject: Smokeping
> 
> 
> Hi Greg,
> I saw your April 20, 2002 posting on the Smokeping mailing list with 
> the subject 'ERROR: x.y has no probe defined' about the 'ERROR: 
> Internet.Root-Servers has no probe defined' you get when you click on 
> one of your summary graphs. Have you had this problem resolved yet? 
> I'm getting the same error on my output and I'm just *frustrated* 
> because I can't find anything on the web that has a slight hint on how

> to fix this problem. So if you could give me any clues on this I'd 
> really appreciate it.
> 
> Thank you,
> --Reza
> 
> 
> 
> -- Binary/unsupported file stripped by Listar --
> -- Err : No filename to use for decode, file stripped.
> -- Type: message/rfc822
> 
> 
> -- Binary/unsupported file stripped by Listar --
> -- Err : No filename to use for decode, file stripped.
> -- Type: message/rfc822
> 
> 
> --
> Unsubscribe
mailto:smokeping-users-request at list.ee.ethz.ch?subject=unsubscribe
> Help
mailto:smokeping-users-request at list.ee.ethz.ch?subject=help
> Archive     http://www.ee.ethz.ch/~slist/smokeping-users
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 
> 

-- 
Adrian Bool			| http://noc.vianw.net/
Director, Global Network	| tel://+44.1925.484061/ 
VIA NET.WORKS Inc. 		| noc://+49.203.3093.1111/



--
Unsubscribe mailto:smokeping-users-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:smokeping-users-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi