[smokeping-users] Re: Connection refused and graphs stopped g enerating
Ross Tsolakidis
rtsolakidis at powerserve.com.au
Fri Sep 6 05:02:21 MEST 2002
Forgot my config:
----------------------------------------------------------------------------
---------------
*** General ***
################################################
# DON'T TOUCH UNLESS YOU KNOW WHAT YOU'RE DOING
# BETWEEN THESE MARKS!
################################################
sendmail = /usr/lib/sendmail
imgcache = /var/www/smokeping
imgurl = ../smokeping
datadir = /var/www/smokeping
piddir = /var/run/smokeping
smokemail = /etc/smokeping/smokemail
################################################
# END OF DON'T TOUCH SECTION
################################################
*** Database ***
step = 300
pings = 20
# consfn mrhb steps total
AVERAGE 0.5 1 1008
AVERAGE 0.5 12 4320
MIN 0.5 12 4320
MAX 0.5 12 4320
AVERAGE 0.5 144 720
MAX 0.5 144 720
MIN 0.5 144 720
*** Presentation ***
template = /etc/smokeping/basepage.html
+ overview
width = 600
height = 50
range = 10h
+ detail
width = 600
height = 200
unison_tolerance = 2
"Last 3 Hours" 3h
"Last 30 Hours" 30h
"Last 10 Days" 10d
"Last 400 Days" 400d
*** Probes ***
+ FPing
binary = /usr/sbin/fping
+ EchoPingHttp
binary = /usr/bin/echoping
+ EchoPingSmtp
binary = /usr/bin/echoping
*** Targets ***
## You have to edit and uncomment all what you want below this.
# Please, refer to smokeping_config man page for mor info
# The given adresses aren't real to avoid DoS.
menu = Top
title = Network Latency Grapher
remark = Welcome to the SmokePing website of PowerServe, we are located in
Melbourne Australia.
probe = FPing
+ World
menu = World
title = Worldwide Connectivity
++ Europe-UK
menu = Europe-UK
title = European-UK Connectivity
+++ Wireplay-UK
menu = Wireplay-UK
title = Wireplay web site in the UK
host = www.wireplay.co.uk
##
++ USA
menu = USA
title = USA connectivity
+++ Cisco
menu = Cisco
title = Cisco web site
host = Cisco.com
##
++ Local
menu = Local stuff
title = Local stuff
+++ WebServers
menu = Web Servers
title = Web Servers
probe = EchoPingHttp
++++ PSWEB1
menu = PSWEB1
title = PSWEB1
host = psweb1.domain.com
++++ PSWEB2
menu = PSWEB2
title = PSWEB2
host = psweb2.domain.com
++++ PSWEB3
menu = PSWEB3
title = PSWEB3
host = psweb3.domain.com
+++++ PROBE_CONF
ignore-cache = yes
force-revalidate = no
port = 80
url = /
+++ Mail-Server
menu = Mail Servers
title = Mail Servers
probe = EchoPingSmtp
++++ MAIL
menu = MAIL
title = mail
host = mail.domain.com
----------------------------------------------------------------------------
-------------
Everything works, except the web servers part.
Anything using EchoPingHttp, just has no data in the graphs it prodiuces.
Cheers.
Ross.
-----Original Message-----
From: Ross Tsolakidis [mailto:rtsolakidis at powerserve.com.au]
Sent: Friday, 6 September 2002 9:53 AM
To: 'smokeping-users at list.ee.ethz.ch'
Subject: [smokeping-users] Re: Connection refused and graphs stopped g
enerating
Just in case anyone missed it :)
--
But the all the echoping stuff is not working.
Correct me if I'm wrong:
The EchoPingHttp, EchoPingSmtp and all the others use echoping ?
I'm guessing they do.
What's interesting about this, is that my probe for EchoPingSmtp is working,
but the HTTP isn't.
Like I said in my last post, when I try and echoping any of my webservers, I
get the following error:
Can't connect to server (Connection refused).
I'm sure it's something basic that I've missed !
--
Please help :)
--
Ross.
-----Original Message-----
From: Ross Tsolakidis [mailto:rtsolakidis at powerserve.com.au]
Sent: Thursday, 5 September 2002 2:19 PM
To: 'smokeping-users at list.ee.ethz.ch'
Subject: [smokeping-users] Re: Connection refused and graphs stopped
gener ating
Actually all my fping probes are working, I just wasn't reading the graph
properly,
(note to self) there's always a little space at the end of the graph :)
But the all the echoping stuff is not working.
Correct me if I'm wrong:
The EchoPingHttp, EchoPingSmtp and all the others use echoping ?
I'm guessing they do.
What's interesting about this, is that my probe for EchoPingSmtp is working,
but the HTTP isn't.
Like I said in my last post, when I try and echoping any of my webservers, I
get the following error:
Can't connect to server (Connection refused).
I'm sure it's something basic that I've missed !
Any ideas anyone ?
Cheers,
--
Ross.
-----Original Message-----
From: Ross Tsolakidis [mailto:rtsolakidis at powerserve.com.au]
Sent: Thursday, 5 September 2002 2:04 PM
To: 'smokeping-users at list.ee.ethz.ch'
Subject: [smokeping-users] Connection refused and graphs stopped
generating
Hi all,
I installed smokeping from the pre-compiled debian package.
Edited the config file, my standard fping probes worked fine for about 3
hours, now they have stopped :(
Also I can't seem to get echoping working, when I try echoping on any of our
web servers, they all return the same error:
Can't connect to server (Connection refused).
Can anyone shed some light on this ?
Thanks :)
--
Ross.
--
Unsubscribe
mailto:smokeping-users-request at list.ee.ethz.ch?subject=unsubscribe
Help mailto:smokeping-users-request at list.ee.ethz.ch?subject=help
Archive http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe
mailto:smokeping-users-request at list.ee.ethz.ch?subject=unsubscribe
Help mailto:smokeping-users-request at list.ee.ethz.ch?subject=help
Archive http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe
mailto:smokeping-users-request at list.ee.ethz.ch?subject=unsubscribe
Help mailto:smokeping-users-request at list.ee.ethz.ch?subject=help
Archive http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:smokeping-users-request at list.ee.ethz.ch?subject=unsubscribe
Help mailto:smokeping-users-request at list.ee.ethz.ch?subject=help
Archive http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the smokeping-users
mailing list