[smokeping-users] Using CiscoRTTMonEchoICMP with VRFs
Rune Thorsplass
gizze at c2i.net
Wed May 20 17:29:42 CEST 2009
Hi
A lot of older IOS isn't IP SLA vrf-aware. Could you inform me which IOS image you are running ? Run "sh ver" on your console and normaly look for image at disk0:
Which SUP are you using??
Also be aware of IOS 12.2(18)SXF9 have some serious software issues and are quite old.
RuneT
----- Original Message -----
From: Noriega, Manuel
To: smokeping-users at lists.oetiker.ch
Sent: Tuesday, May 19, 2009 4:05 AM
Subject: [smokeping-users] Using CiscoRTTMonEchoICMP with VRFs
Hello,
I've recently setup smokeping version 2.004002 and am trying to get CiscoRTTMonEchoICMP to work with VRFs but when I run it I get the following error:
SNMP Error:
Received SNMP response with error code
error status: noCreation
index 14 (OID: 1.3.6.1.4.1.9.9.42.1.2.2.1.26.22187)
SNMPv2c_Session (remote host: "10.32.0.218" [10.32.0.218].161)
community: "minmssecret"
request ID: 422131458
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
My config is:
++ 10-6-40-140
menu = 10.6.40.140
probe = CiscoRTTMonEchoICMP
title = 10.6.40.140 vrf myVrfName
host = 10.6.40.140
ioshost = mycommunity at 10.32.0.218
packetsize = 56
tos = 160
vrf = myVrfName
And this is from a cisco CISCO7606 router running IOS Version 12.2(18)SXF9.
Anyone run into a similar issue? Googling hasn't helped in finding a solution.
Thanks,
Manuel
------------------------------------------------------------------------------
_______________________________________________
smokeping-users mailing list
smokeping-users at lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/smokeping-users/attachments/20090520/e70772bd/attachment.html
More information about the smokeping-users
mailing list