[smokeping-users] FPing probe with multiple source addresses?

[sosogh at 126.com]

Hi Tobi

>you just create sub-probes ...

In this case ,if I want the  slave to use "FPingA".
Should I define "sub-probes " in the config file on master or on slave?




sosogh at 126.com

From: Tobias Oetiker
Date: 2013-11-19 16:33
To: Parke
CC: smokeping-users
Subject: Re: [smokeping-users] FPing probe with multiple source addresses?
Hi Parke,

Yesterday Parke wrote:

> Hi,
>
> Is it possible to configure two (or more) "instances" of the FPing
> probe?  I want FPing to be able to use different source addresses, on
> a per Target basis.

sure, it certainly is ...



*** Probes ***

+ FPing

binary = /usr/sbin/fping

++ FPingA

some_config=xxx

++ FPingB

some_config=yyyy



cheers
tobi


>
> Thanks!
>
> -Parke
>
> _______________________________________________
> smokeping-users mailing list
> smokeping-users at lists.oetiker.ch
> https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
>
>

-- 
Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland
http://it.oetiker.ch tobi at oetiker.ch ++41 62 775 9902 / sb: -9900

_______________________________________________
smokeping-users mailing list
smokeping-users at lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/smokeping-users/attachments/20131119/37e5f795/attachment.htm