[smokeping-users] Severe lag when restarting Smokeping and webpage timing out.

[Brett Bronson]

Also, it looks like the version I have running is actually the latest, I
assumed it would output the version as 2.6.9. Sorry


On Tue, Mar 4, 2014 at 3:29 PM, Brett Bronson
<brett.bronson at bigblockla.com>wrote:

> Okay, it looks like I was actually using an older version of smokeping.
> I've removed it and installed the latest version on the site and my config
> is as follows:
> http://pastebin.com/ZsLE8uCp
>
> Before, I was able to get smokeping to work fine up until I added the
> section:
>
> + nodes
> menu = Render Node Latency
> title = Render Node Latency (ICMP Pings)
>
> ++ larender001a
> host = larender001a
> ++ larender001b
> host = larender001b
> ++ larender001c
> host = larender001c
> ++ larender001d
> host = larender001d
>
> ++ larender002a
> host = larender002a
> ++ larender002b
> host = larender002b
> ++ larender002c
> host = larender002c
> ++ larender002d
> host = larender002d
>
>
>
> Now that I look at the logs, it looks like it's still using the old
> version....
> [ ... ]
> Tue Mar  4 15:03:05 2014 - FPing: probing 5 targets with step 300 s and
> offset 116 s.
> Tue Mar  4 15:16:01 2014 - Smokeping version 2.006009 successfully
> launched.
> Tue Mar  4 15:16:01 2014 - Not entering multiprocess mode for just a
> single probe.
> Tue Mar  4 15:16:01 2014 - FPing: probing 13 targets with step 300 s and
> offset 163 s.
> Tue Mar  4 15:25:59 2014 - Smokeping version 2.006009 successfully
> launched.
> Tue Mar  4 15:25:59 2014 - Not entering multiprocess mode for just a
> single probe.
> Tue Mar  4 15:25:59 2014 - FPing: probing 13 targets with step 300 s and
> offset 159 s.
>
> Before, I used sudo apt-get install smokeping to install, but I later
> removed it using sudo apt-get remove smokeping; however, it looks like it
> didn't remove the old version? Any idea how I could resolve this so that it
> loads up the newer version?
>
>
>
>
>
> On Tue, Mar 4, 2014 at 2:28 PM, Gregory Sloop <gregs at sloop.net> wrote:
>
>>  I don't see a database section, so I assume it's somewhere else.
>> [Nothing looks obviously wrong - but that was just a quick glance.]
>>
>> But when you first start SP after adding a bunch of targets, it's going
>> to have to allocate/create the RRD for each of the targets.
>> [Also, are there slaves, because it will create X * 60 new RRD's - where
>> X is how many slave SP instances you have. (In addition to the master
>> RRD's) ]
>>
>> I wouldn't think that would take 10m, but I can't see how much data
>> you're stuffing in each RRD, or if you have slaves, which might help
>> explain it.
>>
>> As to why web-pages won't work, I'm not sure. Have you looked at the
>> apache logs to see what they say? Or run SP in debug mode? [smokeping
>> --debug
>> IIRC]
>>
>> -Greg
>>
>>
>>  Hello,
>>
>> I recently updated my smokeping Target configuration to include about 60
>> of our machines in our render farm and noticed that restarting the
>> smokeping service took about 10 minutes, and now our webpage will not load.
>>
>> Any ideas?
>>
>> My config:
>> http://pastebin.com/ibNmGhAF
>>
>>
>> --
>> Brett Bronson
>> Big Block | Pipeline TD
>> http://www.bigblockla.com
>> [m] 805-338-6520
>>
>>
>>
>
>
> --
> Brett Bronson
> Big Block | Pipeline TD
> http://www.bigblockla.com
> [m] 805-338-6520
>
>


-- 
Brett Bronson
Big Block | Pipeline TD
http://www.bigblockla.com
[m] 805-338-6520
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/smokeping-users/attachments/20140304/fd87e05c/attachment-0001.htm