[smokeping-users] New probe speedtest
Adrian Popa
adrian_gh.popa at telekom.ro
Mon Oct 12 16:07:01 CEST 2015
Thanks for posting.
Now I remember what else I changed:
This is from rrdtool info:
ds[ping1].index = 3
ds[ping1].type = "GAUGE"
ds[ping1].minimal_heartbeat = 7200
ds[ping1].min = 0.0000000000e+00
ds[ping1].max = 1.8000000000e+02
ds[ping1].last_ds = "0.0000000000e+00"
ds[ping1].value = 0.0000000000e+00
ds[ping1].unknown_sec = 0
As you can see, default RRDs are created with a max value of 180. This
means that values higher than 180 will be ignored.
I submitted a patch that was included in the official GIT repository to
remove this limit:
https://github.com/oetiker/SmokePing/commit/60419834f224a0735094fd4ad0aac8eac3b15289
Make the same change, delete the old RRDs and restart smokeping.
Good luck.
I will post this info in the project's readme...
On 10/12/15 14:10, STR . wrote:
>
> Yes, the graphs are empty in both overview and detail pages.
>
> Here are the RRDs:
>
> https://dl.dropboxusercontent.com/u/314525/upload_to_Tata_Technologies_Pune.rrd
>
> https://dl.dropboxusercontent.com/u/314525/download_from_Tata_Technologies_Pune.rrd
>
> Thanks,
>
> S
>
> *From:*Adrian Popa [mailto:adrian_gh.popa at telekom.ro]
> *Sent:* Monday, October 12, 2015 4:18 PM
> *To:* STR . <strykar at hotmail.com>; smokeping-users at lists.oetiker.ch
> *Subject:* Re: [smokeping-users] New probe speedtest
>
> Strange... So, the graphs are empty both in overview and when clicking
> on them to view details, right? The max_rtt setting only affects the
> graphs viewed in overview. I will try to remember if I changed
> anything else in smokeping's code, but I don't think so...
>
> Can you share a rrd file/graph?
>
> On 10/12/15 12:01, STR . wrote:
>
> Thanks for clearing that up.
>
> I had it configured correctly including max_rtt and its been a few
> days but the graphs are empty/nan after a few days.
>
> Obviously things are written to the rrd, I’m at a loss to
> understand why the graphs show up empty.
>
> Here are the relevant bits from my configuration:
>
> /opt/smokeping/etc/config:
>
> + overview
>
> width = 600
>
> height = 50
>
> range = 10h
>
> max_rtt = 1000000000
>
> *** Probes ***
>
> + speedtest
>
> binary = /usr/bin/speedtest-cli
>
> timeout = 300
>
> step = 3600
>
> offset = random
>
> pings = 3
>
> ++ speedtest-download
>
> measurement = download
>
> ++ speedtest-upload
>
> measurement = upload
>
> *** Targets ***
>
> + download_from_Tata_Technologies_Pune
>
> menu = Speedtest download
>
> title = download_from_Tata_Technologies_Pune
>
> probe = speedtest-download
>
> server = 6344
>
> measurement = download
>
> host = wrt.asuscomm.com
>
> + upload_to_Tata_Technologies_Pune
>
> menu = Speedtest upload
>
> title = upload_to_Tata_Technologies_Pune
>
> probe = speedtest-upload
>
> server = 6344
>
> measurement = upload
>
> host = wrt.asuscomm.com
>
> Thanks,
>
> S
>
> *From:*smokeping-users
> [mailto:smokeping-users-bounces+strykar=hotmail.com at lists.oetiker.ch]
> *On Behalf Of *Adrian Popa
> *Sent:* Thursday, October 8, 2015 4:34 PM
> *To:* smokeping-users at lists.oetiker.ch
> <mailto:smokeping-users at lists.oetiker.ch>
> *Subject:* Re: [smokeping-users] New probe speedtest
>
> Hello STR,
>
> The Host is not used internally - you can set it to whatever you like.
>
> I can see you're running tests every hour. In order to see data
> graphed, you need to wait for at least 2 polling intervals to
> complete, so you'd see data only in the third hour.
>
> One more thing, smokeping is designed to drop data that is very
> large in value to prevent spikes from error readings. You can
> disable this by setting this in the overview section (see the readme):
>
> |+overview|
>
> |max_rtt = 1000000000|
>
> On 10/07/15 10:40, STR . wrote:
>
> Hi,
>
>
>
> Interesting plugin, what is the value of host? The hostname the smokeping
>
> probe is launched from?
>
> "host = dummy.com"
>
> I see rrd updates but my graphs are empty/nan.
>
>
>
>
>
> Snipped output below:
>
>
>
> root at slack14:~# /opt/smokeping/bin/smokeping --debug
>
> ### parsing /usr/bin/speedtest-cli output... OK (version 0.3.4)
>
> ### parsing /usr/bin/speedtest-cli output... OK (version 0.3.4)
>
> ### parsing dig output...OK
>
> Smokeping version 2.006011 successfully launched.
>
> Not entering multiprocess mode with '--debug'. Use '--debug-daemon' for
>
> that.
>
>
>
> speedtest-download: probing 1 targets with step 3600 s and offset 19 s.
>
> speedtest-upload: probing 1 targets with step 3600 s and offset 19 s.
>
> speedtest-download: forks 5, timeout for each target 901
>
> speedtest-download: query=/usr/bin/speedtest-cli --server 6344 --simple 2>&1
>
> speedtest-download: output: Ping: 42.967 ms
>
> speedtest-download: output: Download: 7.96 Mbit/s
>
> speedtest-download: Got value: 7.96, unit: Mbit/s -> 7960000
>
> speedtest-download: time=7.9600000000e+06 7.9600000000e+06 7.9600000000e+06
>
> speedtest-download: wrt.asuscomm.com: got 7.9600000000e+06 7.9600000000e+06
>
> 7.9600000000e+06
>
>
>
> speedtest-upload: forks 5, timeout for each target 901
>
> speedtest-upload: query=/usr/bin/speedtest-cli --server 6344 --simple 2>&1
>
> speedtest-upload: output: Ping: 37.56 ms
>
> speedtest-upload: output: Download: 6.66 Mbit/s
>
> speedtest-upload: output: Upload: 0.37 Mbit/s
>
> speedtest-upload: Got value: 0.37, unit: Mbit/s -> 370000
>
> speedtest-upload: time=3.7000000000e+05 3.7000000000e+05 3.7000000000e+05
>
> speedtest-upload: wrt.asuscomm.com: got 3.7000000000e+05 3.7000000000e+05
>
> 3.7000000000e+05
>
>
>
> Calling
>
> RRDs::update(/opt/smokeping/htdocs/data/download_from_Tata_Technologies_Pune
>
> .rrd --template uptime:loss:median:ping1:ping2:ping3
>
> 1444202889:U:0:7.9600000000e+06:7.9600000000e+06:7.9600000000e+06:7.96000000
>
> 00e+06)
>
> Calling
>
> RRDs::update(/opt/smokeping/htdocs/data/upload_to_Tata_Technologies_Pune.rrd
>
> --template uptime:loss:median:ping1:ping2:ping3
>
> 1444202889:U:0:3.7000000000e+05:3.7000000000e+05:3.7000000000e+05:3.70000000
>
> 00e+05)
>
>
>
>
>
> So RRD appears to be updated but I don't see it log what the issue may be
>
> even with debug enabled, the graphs are all empty/nan.
>
> Here's snipped debug plugin output:
>
>
>
> Oct 7 11:53:12 slack14 speedtest[24762]: Init: version 0.3.4
>
> Oct 7 11:53:12 slack14 speedtest[24762]: Init: version 0.3.4
>
> Oct 7 11:54:59 slack14 smokeping[24789]: query=/usr/bin/speedtest-cli
>
> --server 6344 --simple 2>&1
>
> Oct 7 11:55:59 slack14 smokeping[24789]: output: Ping: 60.647 ms
>
> Oct 7 11:55:59 slack14 smokeping[24789]: output: Download: 3.07 Mbit/s
>
> Oct 7 11:55:59 slack14 smokeping[24789]: output: Upload: 0.37 Mbit/s
>
> Oct 7 11:55:59 slack14 smokeping[24789]: Got value: 0.37, unit: Mbit/s ->
>
> 370000
>
> Oct 7 11:55:59 slack14 smokeping[24789]: time=3.7000000000e+05
>
> 3.7000000000e+05 3.7000000000e+05
>
> Oct 7 12:44:32 slack14 smokeping[29972]: query=/usr/bin/speedtest-cli
>
> --server 6344 --simple 2>&1
>
> Oct 7 12:45:35 slack14 smokeping[29972]: output: Ping: 59.49 ms
>
> Oct 7 12:45:35 slack14 smokeping[29972]: output: Download: 8.03 Mbit/s
>
> Oct 7 12:45:35 slack14 smokeping[29972]: Got value: 8.03, unit: Mbit/s ->
>
> 8030000
>
> Oct 7 12:45:35 slack14 smokeping[29972]: time=8.0300000000e+06
>
> 8.0300000000e+06 8.0300000000e+06
>
> Oct 7 12:55:38 slack14 speedtest[31340]: Init: version 0.3.4
>
> Oct 7 12:55:38 slack14 speedtest[31340]: Init: version 0.3.4
>
> Oct 7 12:55:38 slack14 speedtest[31416]: query=/usr/bin/speedtest-cli
>
> --server 6344 --simple 2>&1
>
> Oct 7 12:56:24 slack14 speedtest[31416]: output: Ping: 42.967 ms
>
> Oct 7 12:56:24 slack14 speedtest[31416]: output: Download: 7.96 Mbit/s
>
> Oct 7 12:56:24 slack14 speedtest[31416]: Got value: 7.96, unit: Mbit/s ->
>
> 7960000
>
> Oct 7 12:56:24 slack14 speedtest[31416]: time=7.9600000000e+06
>
> 7.9600000000e+06 7.9600000000e+06
>
> Oct 7 12:56:33 slack14 speedtest[31635]: query=/usr/bin/speedtest-cli
>
> --server 6344 --simple 2>&1
>
> Oct 7 12:57:26 slack14 speedtest[31635]: output: Ping: 37.56 ms
>
> Oct 7 12:57:26 slack14 speedtest[31635]: output: Download: 6.66 Mbit/s
>
> Oct 7 12:57:26 slack14 speedtest[31635]: output: Upload: 0.37 Mbit/s
>
> Oct 7 12:57:26 slack14 speedtest[31635]: Got value: 0.37, unit: Mbit/s ->
>
> 370000
>
> Oct 7 12:57:26 slack14 speedtest[31635]: time=3.7000000000e+05
>
> 3.7000000000e+05 3.7000000000e+05
>
>
>
>
>
> It did log this in one of the runs when I left it running overnight:
>
>
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output: Traceback (most recent
>
> call last):
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output: File
>
> "/usr/bin/speedtest-cli", line 11, in <module>
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output: sys.exit(main())
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output: File
>
> "/usr/lib64/python2.7/site-packages/speedtest_cli.py", line 790, in main
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output: speedtest()
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output: File
>
> "/usr/lib64/python2.7/site-packages/speedtest_cli.py", line 631, in
>
> speedtest
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output: servers =
>
> closestServers(config['client'], True)
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output: File
>
> "/usr/lib64/python2.7/site-packages/speedtest_cli.py", line 436, in
>
> closestServers
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output:
>
> serversxml.append(uh.read(10240))
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output: File
>
> "/usr/lib64/python2.7/socket.py", line 380, in read
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output: data =
>
> self._sock.recv(left)
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output: File
>
> "/usr/lib64/python2.7/httplib.py", line 567, in read
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output: s = self.fp.read(amt)
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output: File
>
> "/usr/lib64/python2.7/socket.py", line 380, in read
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output: data =
>
> self._sock.recv(left)
>
> Oct 6 12:01:16 slack14 speedtest[35113]: output: socket.timeout: timed out
>
>
>
>
>
>
>
> I'm not sure why graphs are generated.
>
>
>
> Thanks,
>
> S
>
>
>
>
>
>
>
> -----Original Message-----
>
> From: smokeping-users
>
> [mailto:smokeping-users-bounces+strykar=hotmail.com at lists.oetiker.ch] On
>
> Behalf Of Adrian Popa
>
> Sent: Monday, October 5, 2015 1:47 PM
>
> To: Pacheco Bravo, Dago Javier<dpacheco at unap.cl> <mailto:dpacheco at unap.cl>;
>
> smokeping-users at lists.oetiker.ch
> <mailto:smokeping-users at lists.oetiker.ch>
>
> Subject: Re: [smokeping-users] New probe speedtest
>
>
>
> The instructions can be found here:
>
> https://github.com/mad-ady/smokeping-speedtest
>
>
>
> The actual plugin (which needs to go in your probes dir - e.g
>
> /opt/smokeping/lib/Smokeping/probes/ ) is here:
>
> https://raw.githubusercontent.com/mad-ady/smokeping-speedtest/master/speedte
>
> st.pm
>
>
>
> Read the instructions and if you get stuck tell us what the problem is.
>
>
>
> I haven't had time to work out the bugs of this plugin and push it upstream
>
> - sorry. Maybe I will have time one day to polish it and include it with the
>
> official plugins
>
>
>
> On 10/02/15 15:09, Pacheco Bravo, Dago Javier wrote:
>
> Hello Adrian,
>
>
>
> Thanks for this probe. I'm trying to enable it form my smokeping
>
> installation but I really don't know where can I get de speedtest.pm file
>
> you mention on installation instructions.
>
> Can you help me with this?
>
>
>
> Bye,
>
>
>
> Dago
>
>
>
> -----Mensaje original-----
>
> De: smokeping-users
>
> [mailto:smokeping-users-bounces+dpacheco=unap.cl at lists.oetiker.ch] En
>
> nombre de Adrian Popa Enviado el: jueves, 11 de junio de 2015 5:42
>
> Para:smokeping-users at lists.oetiker.ch
> <mailto:smokeping-users at lists.oetiker.ch>
>
> Asunto: [smokeping-users] New probe speedtest
>
>
>
> Hello everyone,
>
>
>
> I'd like to share with you a new probe I've been working on - integrating
>
> speedtest-cli project to work with smokeping. The idea was that we needed to
>
> run some tests to get the customer's "experience" when using speedtest.net
>
> with different test servers. We developed this probe, and measure the
>
> upload/download rate the client's connection supports.
>
>
>
> Plugin description and examples are here:
>
>
>
> https://github.com/mad-ady/smokeping-speedtest
>
>
>
> There is a bit of a deviation from standard plugins - meaning it ignores
>
> the pings variable and does only one test. This was done in order to prevent
>
> the IP getting banned for too agressive behavior by the speedtest.net
>
> servers. It can be reactivated - I'm open to ideas.
>
>
>
> Here's a sample graph from a slave probe (1 hour polling):
>
>
>
> http://imgur.com/cTJdHCS
>
>
>
> @tobi: if you feel this plugin could be useful and should be included in
>
> the main release, let me know and I'll see how I can merge it...
>
>
>
> Feedback welcome,
>
>
>
> Regards,
>
> Adrian
>
>
>
> _______________________________________________
>
> smokeping-users mailing list
>
> smokeping-users at lists.oetiker.ch
> <mailto:smokeping-users at lists.oetiker.ch>
>
> https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
>
>
>
>
>
> --
>
> TELEKOM ROMANIA
>
> Adrian Popa
>
> Expert Engineer
>
> Applications, Security & EMS
>
> 35-37 Calea Victoriei, Palatul Telefoanelor
>
> Mobile: +40 766 673 290
>
> Phone: +40 21 400 7567
>
>
>
> _______________________________________________
>
> smokeping-users mailing list
>
> smokeping-users at lists.oetiker.ch
> <mailto:smokeping-users at lists.oetiker.ch>
>
> https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
>
>
>
> _______________________________________________
>
> smokeping-users mailing list
>
> smokeping-users at lists.oetiker.ch
> <mailto:smokeping-users at lists.oetiker.ch>
>
> https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
>
> .
>
>
>
>
>
>
> --
>
> TELEKOM ROMANIA
>
> Adrian Popa
>
> Expert Engineer
>
> Applications, Security & EMS
>
> 35-37 Calea Victoriei, Palatul Telefoanelor
>
> Mobile: +40 766 673 290
>
> Phone: +40 21 400 7567
>
>
>
> --
> TELEKOM ROMANIA
> Adrian Popa
> Expert Engineer
> Applications, Security & EMS
> 35-37 Calea Victoriei, Palatul Telefoanelor
> Mobile: +40 766 673 290
> Phone: +40 21 400 7567
--
TELEKOM ROMANIA
Adrian Popa
Expert Engineer
Applications, Security & EMS
35-37 Calea Victoriei, Palatul Telefoanelor
Mobile: +40 766 673 290
Phone: +40 21 400 7567
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.oetiker.ch/pipermail/smokeping-users/attachments/20151012/c2b566f4/attachment-0001.html>
More information about the smokeping-users
mailing list