[mrtg] Re: NT & Disk Usage

[Zaid Ali]

Thanks to all that answered my question ! it works now...Thanks again.

Zaid


-----Original Message-----
From: Garth K. Williams [mailto:garth.williams at home.com]
Sent: Monday, August 09, 1999 9:26 AM
To: 'Zaid Ali'
Subject: RE: [mrtg] NT & Disk Usage


Your fully qualified OID string for D: will likely have changed.  You
will
need to do an snmputil walk on your logical disk OID to get the proper
values.

snmputil walk 127.0.0.1 public .1.3.6.1.4.1.311.1.1.3.1.1.5.1.4.6. -
should
do the trick!

Been There, Done That!


Garth K. Williams
Systems Engineer (MCSE) - Williams Technology Consulting Services
Edmonton, Alberta  Canada

Web: www.wtcs.org		Email: garth.williams at home.com
Home of: http://snmp.cjb.net - SNMP for the Public Community


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Zaid Ali
Sent: Monday, August 09, 1999 2:03 PM
To: 'MRTG Mailing List'
Subject: [mrtg] NT & Disk Usage


I have been monitoring NT disk space for sometime now without any
problems until this one. I plugged in a RAID drive which my NT System
sees as the D drive and I have my OS and other stuff on the C Drive. The
problem I am having is that I seem to be only able to do snmp polls on
the C Drive, I am using the SNMP OID's as below :

.1.3.6.1.4.1.311.1.1.3.1.1.5.1.4.6.48.58.48.58.67.58.0   C Drive
.1.3.6.1.4.1.311.1.1.3.1.1.5.1.4.6.48.58.48.58.68.58.0   D Drive

I shouldnt think that the RAID matters because NT sees it as one big
drive so I am not sure why my SNMP polls on the D Drive doesnt work.

Can anyone shed some light into this?

Thanks
Zaid
------------------------------------------
Zaid Ali
Network Engineer
Active Touch, Inc
5225 Betsy Ross Drive
Santa Clara, CA  95054
Tel: 408-980-5200 x 2144
fax: 408-980-5280
www.activetouch.com
www.webex.com
----------------------------------------



--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg


--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg