[mrtg] Re: How can I use MRTG to monitor my probe ?

[Stieers, Ken]

Try 1.3.6.1.4.1.1599.7.1.4.0&1.3.6.1.4.1.1599.7.1.6.0

Ken 

> -----Original Message-----
> From: gaetan.claeys at MOBILE.BELGACOM.BE
> [mailto:gaetan.claeys at MOBILE.BELGACOM.BE]
> Sent: Wednesday, August 18, 1999 8:56 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] How can I use MRTG to monitor my probe ?
> 
> 
> Hi all,
> We have temperature/humidity probes fron NMT in our environment. 
> The probe is snmp manageable:
> TemperatureValue : 1.3.6.1.4.1.1599.7.1.4
> HumidityValue : 1.3.6.1.4.1.1599.7.1.6
> 
> I've tried to manage thoses value with MRTG:
> 
> Target[thbgt01]:
> 1.3.6.1.4.1.1599.7.1.4&1.3.6.1.4.1.1599.7.1.6:public at probe_ip_address
> MaxBytes1[thbgt01]: 50
> MaxBytes2[thbgt01]: 100
> Title[thbgt01]: THBGT01 Probe
> PageTop[thbgt01]: <H1>Probe Temperature & Humidity
>  </H1>
>  <TABLE>
>    <TR><TD>System:</TD><TD>THBGT01 in BGTower</TD></TR>
>    <TR><TD>Maintainer:</TD><TD>CLAEYS G 205.26.77</TD></TR>
>    <TR><TD>Interface:</TD><TD>Pods</TD></TR>
>    <TR><TD>IP:</TD><TD></TD></TR>
>   </TABLE>
> 
> 
> The message I get from mrtg is:
> 
> Received SNMP response with error code.
> 	error status:noSuchName
> 	index 1 <OID: 1.3.6.1.4.1.1599.7.1.4>
> SNMPGET Problem for 1.3.6.1.4.1.1599.7.1.4  
> 1.3.6.1.4.1.1599.7.1.6 sysUptime
> sysName
> SNMPGET: Failed to reach target. I tried multiples times.
> 
> What can I do to solve this problem ? Does I need to download 
> the Probe MIB
> ?
> Thanks for your help,
> 
> Regards,
> Gaetan
> 
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> 

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg