[mrtg] Re: mrtg

[Saknon Kangsumrith]

To all
   My customer is using an MRTG but she seems to have a problem running
it. She's using the following information. please advise...
> 	
> manager:Solaris 2.5.1(sparc)
> 	mrtg-2.8.6
> 	gd-1.6.2
> 	zlib.1.1.3
> 	libpng.1.0.2
> 	perl5.004.04
> 
> when issue the ../run/mrtg mrtg.cfg,it produces the output like mrtg.err.
> 
Thanks
Saknon Kangsumrith

Here's an error message:
========================
# ./mrtg mrtg.cfg
ld.so.1: .//rateup: fatal: libgd.so.0: open failed: No such file or
directory

PROBLEM: rateup died from Signal 9
 with Exit Value 0 when doing router '203.151.88.5.1'
 code was 9, retcode was . If this happens all the time,
 you should probably investigate the cause. :-)

ld.so.1: .//rateup: fatal: libgd.so.0: open failed: No such file or
directory

PROBLEM: rateup died from Signal 9
 with Exit Value 0 when doing router 'ppp-pea'
 code was 9, retcode was . If this happens all the time,
 you should probably investigate the cause. :-)

Here's a configuration
======================
#---------------------------------------------------------------

Target[ppp-pea]: 2:public at 203.151.88.5
MaxBytes[ppp-pea]: 193000
Title[ppp-pea]: r1600 (ppp-pea): Serial0
PageTop[ppp-pea]: <H1>Traffic Analysis for Serial0
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>r1600 in </TD></TR>
   <TR><TD>Maintainer:</TD><TD>Surapee Khembooppa</TD></TR>
   <TR><TD>Interface:</TD><TD>Serial0 (2)</TD></TR>
   <TR><TD>IP:</TD><TD>ppp-pea (203.151.72.78)</TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>193.0 kBytes/s (ppp)</TD></TR>
  </TABLE>

#---------------------------------------------------------------



--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg