[mrtg] problem with running MRTG
Saknon Kangsumrith
saknon at inet.co.th
Fri Aug 20 10:47:02 MEST 1999
To all
My customer is using an MRTG but she seems to have a problem running
it. She's using the following information. please advise...
>
> manager:Solaris 2.5.1(sparc)
> mrtg-2.8.6
> gd-1.6.2
> zlib.1.1.3
> libpng.1.0.2
> perl5.004.04
>
> when issue the ../run/mrtg mrtg.cfg,it produces the output like mrtg.err.
>
Thanks
Saknon Kangsumrith
Here's an error message:
========================
# ./mrtg mrtg.cfg
ld.so.1: .//rateup: fatal: libgd.so.0: open failed: No such file or
directory
PROBLEM: rateup died from Signal 9
with Exit Value 0 when doing router '203.151.88.5.1'
code was 9, retcode was . If this happens all the time,
you should probably investigate the cause. :-)
ld.so.1: .//rateup: fatal: libgd.so.0: open failed: No such file or
directory
PROBLEM: rateup died from Signal 9
with Exit Value 0 when doing router 'ppp-pea'
code was 9, retcode was . If this happens all the time,
you should probably investigate the cause. :-)
Here's a configuration
======================
#---------------------------------------------------------------
Target[ppp-pea]: 2:public at 203.151.88.5
MaxBytes[ppp-pea]: 193000
Title[ppp-pea]: r1600 (ppp-pea): Serial0
PageTop[ppp-pea]: <H1>Traffic Analysis for Serial0
</H1>
<TABLE>
<TR><TD>System:</TD><TD>r1600 in </TD></TR>
<TR><TD>Maintainer:</TD><TD>Surapee Khembooppa</TD></TR>
<TR><TD>Interface:</TD><TD>Serial0 (2)</TD></TR>
<TR><TD>IP:</TD><TD>ppp-pea (203.151.72.78)</TD></TR>
<TR><TD>Max Speed:</TD>
<TD>193.0 kBytes/s (ppp)</TD></TR>
</TABLE>
#---------------------------------------------------------------
--
* To unsubscribe from the mrtg mailing list, send a message with the
subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
--
* To unsubscribe from the mrtg mailing list, send a message with the
subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
More information about the mrtg
mailing list