[mrtg] Re: Cisco Catalyst 5500

[Kevin Sheard]

Xavih

Thanks. I don't know about the 3000, but snmpwalk <ipaddr> <ctty_str>
interfaces.ifTable.ifEntry.ifDescr works with 5300, 3640 and 7200 routers. This is
generic - the Cat seems to be proprietory.

Here's some good ones:
    ifInOctets.1&ifOutOctets.1 - input & output traffic
    ifOperHack.1&ifOperHack.2 - Operational status (1=up, 0=down) - use maxbytes=1
for logical registration
    ifAdminHack - Admin status
    .1.3.6.1.4.1.9.9.47.1.1.6.0&.1.3.6.1.4.1.9.9.47.1.1.7.0 (no port numbers/port
0) - number of modems used & unused in a 5300) - maxbytes= number modems avail.
    1.3.6.1.4.1.9.9.13.1.3.1.3.1&1.3.6.1.4.1.9.9.13.1.3.1.3.3 - inlet & outlet
temperature on 7200
    1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.1.8.0 - Utilised CPU & Free Memory

Thanks

Kev



comunicacions.informatica at grup.upf.es wrote:

> I don't know how to ask for the Index in the Cisco directly, but I've also been
> using snmpwalk to ask for it in a Cisco5000 without problems, asking for the
> MIB:
>
> 1.3.6.1.4.1.9.5.1.4.1.1.11
> (iso.org.dod.internet.private.enterprises.cisco.workgroup.stack.portGrp.portTab
> le.portEntry.portIfIndex)
>
> To ask for the portname you can use the MIB:
> 1.3.6.1.4.1.9.5.1.4.1.1.4
> (iso.org.dod.internet.private.enterprises.cisco.workgroup.stack.portGrp.portTab
> le.portEntry.portName)
>
> Going down from ...cisco.workgtoup.stack.... you can get many information about
> each port.
>
> It is possible to get the same kind of information for Cisco3000?
> I'm getting crazy trying to get it !!!!
>
> Hope it helps,
>
> Xavih
> Comunicacions Informàtica
> Universitat Pompeu Fabra
> Barcelona
-------------- next part --------------
A non-text attachment was scrubbed...
Name: kevin.sheard.vcf
Type: text/x-vcard
Size: 231 bytes
Desc: Card for Kevin Sheard
Url : https://lists.oetiker.ch/pipermail/mrtg/attachments/19990826/f1730b14/attachment.vcf