[mrtg] Re: empty mibhelp.txt file
Daniel R . Kilbourne
drk at voyager.net
Wed Dec 8 15:37:17 MET 1999
Here ya go....
___
Dan
On Wed, Dec 08, 1999 at 08:35:54AM -0500, Sottile, Steve wrote:
>
> when I installed MRTG it installed an empty mibhelp.txt file.
> Anyone one the list have a pointer where I might get the file?
>
> Steve Sottile
> Bay State Gas
> Phone 508 836-7019
> email ssottile at bgc.com
>
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
> subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
>
>
--
___
Daniel R. Kilbourne
drk at voyager.net
Network Engineer
Voyager.net
-- Attached file included as plaintext by Listar --
Table of Known OIDS
This File Contains a collection of interesting MIB Entries ...
mrtg knows about their names ... depending on the ASN.1 Syntax,
must use Options[]: absolute to make things work ...
Descriptor: ifOperStatus
Identifier: 1.3.6.1.2.1.2.2.1.8
ASN.1 Syntax: INTEGER
Enumeration: up 1, down 2, testing 3
The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
Descriptor: ifAdminStatus
Identifier: 1.3.6.1.2.1.2.2.1.7
ASN.1 Syntax: INTEGER
Enumeration: up 1, down 2, testing 3
The current administrative state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
Descriptor: ifInOctets
Identifier: 1.3.6.1.2.1.2.2.1.10
ASN.1 Syntax: Counter32
The total number of octets received on the
interface, including framing characters.
Descriptor: ifInUcastPkts
Identifier: 1.3.6.1.2.1.2.2.1.11
ASN.1 Syntax: Counter32
The number of subnetwork-unicast packets
delivered to a higher-layer protocol.
Descriptor: ifInNUcastPkts
Identifier: 1.3.6.1.2.1.2.2.1.12
ASN.1 Syntax: Counter32
The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.
Descriptor: ifInDiscards
Identifier: 1.3.6.1.2.1.2.2.1.13
ASN.1 Syntax: Counter32
The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet could be to free up
buffer space.
Descriptor: ifInErrors
Identifier: 1.3.6.1.2.1.2.2.1.14
ASN.1 Syntax: Counter32
The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.
Descriptor: ifInUnknownProtos
Identifier: 1.3.6.1.2.1.2.2.1.15
ASN.1 Syntax: Counter32
The number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol.
Descriptor: ifOutOctets
Identifier: 1.3.6.1.2.1.2.2.1.16
ASN.1 Syntax: Counter32
The total number of octets transmitted out of the
interface, including framing characters.
Descriptor: ifOutUcastPkts
Identifier: 1.3.6.1.2.1.2.2.1.17
ASN.1 Syntax: Counter32
The total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent.
Descriptor: ifOutNUcastPkts
Identifier: 1.3.6.1.2.1.2.2.1.18
ASN.1 Syntax: Counter32
The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent.
Descriptor: ifOutDiscards
Identifier: 1.3.6.1.2.1.2.2.1.19
ASN.1 Syntax: Counter32
The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer space.
Descriptor: ifOutErrors
Identifier: 1.3.6.1.2.1.2.2.1.20
ASN.1 Syntax: Counter32
The number of outbound packets that could not be
transmitted because of errors.
Descriptor: ifOutQLen
Identifier: 1.3.6.1.2.1.2.2.1.21
ASN.1 Syntax: Unsigned32
The length of the output packet queue (in
packets).
##
## Usersupplied stuff
##
-----
From: Simon Ferrett <simonf at world.net>
'frInOctets' => '1.3.6.1.2.1.10.32.2.1.9'
'frOutOctets' => '1.3.6.1.2.1.10.32.2.1.7'
which when used in the form:
frInOctets.pp.dd&frOutOctets.pp.dd:community at cisco.router
where pp is the physical port that the frame relay pvc is
defined on and dd is the DLCI of the pvc gets you the in
and out octets for just that pvc.
##
## ifAdminHack and ifOperHack by Tobias Oetiker
##
---
The return values of ifAdminStatus and ifOperStatus are not very usefull
for graphing. Use ifOperHack and ifAdminHack instead. They return 1 for
UP and 0 otherwise.
---
##
## Date: Fri, 17 Oct 1997 11:52:03 -0700
## From: Greg Hoglund <greg.hoglund at sierra.com>
##
Your Mib.hlp file is nice, but I have found a few more OIDs which are
very useful, and your users may want to know about them. This is a
common format I use for the config file..
# My additional OID's
# tcpCurrEstab/tcpAttemptFails
Target[machine.1]: 1.3.6.1.2.1.6.9.0&1.3.6.1.2.1.6.7.0:public at machine.machine.com
MaxBytes[machine.1]: 1250000
Options[machine.1]: growright
Title[machine.1]: machine.machine.com
PageTop[machine.1]: <H1>Traffic Analysis for machine</H1>
<TABLE>
<TR><TD>System:</TD><TD>machine.machine.com</TD></TR>
<TR><TD>Maintainer:</TD><TD>me</TD></TR>
<TR><TD>Interface:</TD><TD>le0 (1)</TD></TR>
<TR><TD>IP:</TD><TD>machine.machine.com (127.0.0.1)</TD></TR>
<TR><TD>Max Speed:</TD>
<TD>512 KBytes/s </TD></TR>
</TABLE>
A few of the OID's which are useful:
NOTE: 0 is the last number in OID's which do not require an interface
number
1.3.6.1.2.1.6.9.0 Current TCP sessions
1.3.6.1.2.1.6.7.0 Number of tcp connection failures
1.3.6.1.2.1.2.2.1.15.<interface> Weird packets, could not identify protocol (garbage on the net)
1.3.6.1.2.1.2.2.1.11.<interface> Number of unicast packets delivered (packets to the local machine)
1.3.6.1.2.1.2.2.1.12.<interface> Number of broadcast/multicast packets delivered (good to help cut down on broadcasts)
1.3.6.1.2.1.2.2.1.19.<interface> Outbound packets dropped becuase of lack of buffer space (woops)
1.3.6.1.2.1.2.2.1.20.<interface> Outbound packets that died due to errors
1.3.6.1.2.1.2.2.1.21.<interface> Number of packets waiting in the outbound queue (good for a server w/ high load)
1.3.6.1.2.1.2.2.1.13.<interface> Inbound packets discarded due to lack of buffer space (woops)
1.3.6.1.2.1.2.2.1.14.<interface> Inbound packets discarded due to errors
There are many other OID's as well, all of which can be obtained from a
MIB database. A helpful MIB database browser can be found at
http://www.ibr.cs.tu-bs.de/cgi-bin/sbrowser.cgi although I dont know how
reliable or how long that source will be maintained.
--
* To unsubscribe from the mrtg mailing list, send a message with the
subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
More information about the mrtg
mailing list