[mrtg] Mrtg on Cisco 801

[Gabriele Giulimondi]

I've a Cisco 801 (ISDN router) on my LAN

cfgmaker works fine. mrtg tell me it can't read Interface BRI0:1 and
BRI0:2. The error message is enclosed here

--------------------------- error message ----------------------------
# ./mrtg test.cfg
SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.2.1.2.2.1.10.2)
SNMPv1_Session (remote host: "193.43.131.62" [193.43.131.62].161
                  community: "public"
                 request ID: 946039319
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for ifInOctets.2 ifOutOctets.2 sysUptime sysName
ifDescr.2 on public at 193.43.131.62
SNMPGET: Failed to reach target: "2:public at 193.43.131.62". I tried
multiple times!
SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  error status: noSuchName
  index 1 (OID: 1.3.6.1.2.1.2.2.1.10.3)
SNMPv1_Session (remote host: "193.43.131.62" [193.43.131.62].161
                  community: "public"
                 request ID: 946039320
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for ifInOctets.3 ifOutOctets.3 sysUptime sysName
ifDescr.3 on public at 193.43.131.62
SNMPGET: Failed to reach target: "3:public at 193.43.131.62". I tried
multiple times!
--------------- end of error message ----------------------

I think it's wrong perhaps the MIB for Cisco 801 (1 ethernet, 1 BRI
isdn) but I didn't tried on Cisco site about this problem.
On another router Cisco 1003 or Cisco 2503 of a friend of mine, all
right.

What can I do? 

Thanks for any help
Gabriele Giulimondi

giulim at pust.urbe.it
giulim at mclink.it

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg