[mrtg] Help with connecting to a Cisco 2610 series router

[Bruce B. Platt]

I am successfully running mrtg with my Cisco 2501 running IOS v 11.3.

We just received a Cisco 2611 and I'd like to monitor that as well.

When I run cfgmaker I get no response from the Cisco 2611.  I have used the
snmp community string as
shown by the show config command and cfgmaker fails as follows:

SNMP Error:
no response received
SNMPv1_Session (remote host: "www.xxx.yyy.zzz" [www.xxx.yyy.zzz].161
                  community: "public"
                 request ID: 1955278080
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for sysDescr sysContact sysName sysLocation ifNumber
sysObjectID on public at www.xxx.yyy.zzz
SNMP Error:
no response received
SNMPv1_Session (remote host: "www.xxx.yyy.zzz" [www.xxx.yyy.zzz].161
                  community: "public"
                 request ID: 848782245
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMP Error:
no response received
SNMPv1_Session (remote host: "www.xxx.yyy.zzz" [www.xxx.yyy.zzz].161
                  community: "public"
                 request ID: 848782246
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)

The router has the following only line referencing snmp in it's configuration:

snmp-server community public RO

Does anyone know of any thing peculiar to this series of routers?

cfgmaker still works just fine on my 2501.

Thanks and regards,

Bruce

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg