[mrtg] Re: Help with connecting to a Cisco 2610 series router

Srinivas Chuthari csrinivas at hifive.net
Tue Dec 28 22:59:51 MET 1999


Do you have any access-lists in the configuration ...?

Sreeni

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Bruce B. Platt
Sent: Tuesday, December 28, 1999 1:48 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Help with connecting to a Cisco 2610 series router


I am successfully running mrtg with my Cisco 2501 running IOS v 11.3.

We just received a Cisco 2611 and I'd like to monitor that as well.

When I run cfgmaker I get no response from the Cisco 2611.  I have used the
snmp community string as
shown by the show config command and cfgmaker fails as follows:

SNMP Error:
no response received
SNMPv1_Session (remote host: "www.xxx.yyy.zzz" [www.xxx.yyy.zzz].161
                  community: "public"
                 request ID: 1955278080
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for sysDescr sysContact sysName sysLocation ifNumber
sysObjectID on public at www.xxx.yyy.zzz
SNMP Error:
no response received
SNMPv1_Session (remote host: "www.xxx.yyy.zzz" [www.xxx.yyy.zzz].161
                  community: "public"
                 request ID: 848782245
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMP Error:
no response received
SNMPv1_Session (remote host: "www.xxx.yyy.zzz" [www.xxx.yyy.zzz].161
                  community: "public"
                 request ID: 848782246
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)

The router has the following only line referencing snmp in it's
configuration:

snmp-server community public RO

Does anyone know of any thing peculiar to this series of routers?

cfgmaker still works just fine on my 2501.

Thanks and regards,

Bruce

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg



More information about the mrtg mailing list