[mrtg] Re: Help with connecting to a Cisco 2610 series router

Bruce B. Platt bbp at comport.com
Tue Dec 28 23:39:29 MET 1999


At 01:59 PM 12/28/1999 -0800, Srinivas Chuthari wrote:

Nope, no access lists.

Thanks for your reply


->Do you have any access-lists in the configuration ...?
->
->Sreeni
->
->-----Original Message-----
->From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
->Behalf Of Bruce B. Platt
->Sent: Tuesday, December 28, 1999 1:48 PM
->To: mrtg at list.ee.ethz.ch
->Subject: [mrtg] Help with connecting to a Cisco 2610 series router
->
->
->I am successfully running mrtg with my Cisco 2501 running IOS v 11.3.
->
->We just received a Cisco 2611 and I'd like to monitor that as well.
->
->When I run cfgmaker I get no response from the Cisco 2611.  I have used the
->snmp community string as
->shown by the show config command and cfgmaker fails as follows:
->
->SNMP Error:
->no response received
->SNMPv1_Session (remote host: "www.xxx.yyy.zzz" [www.xxx.yyy.zzz].161
->                  community: "public"
->                 request ID: 1955278080
->                PDU bufsize: 8000 bytes
->                    timeout: 2s
->                    retries: 5
->                    backoff: 1)
->SNMPGET Problem for sysDescr sysContact sysName sysLocation ifNumber
->sysObjectID on public at www.xxx.yyy.zzz
->SNMP Error:
->no response received
->SNMPv1_Session (remote host: "www.xxx.yyy.zzz" [www.xxx.yyy.zzz].161
->                  community: "public"
->                 request ID: 848782245
->                PDU bufsize: 8000 bytes
->                    timeout: 2s
->                    retries: 5
->                    backoff: 1)
->SNMP Error:
->no response received
->SNMPv1_Session (remote host: "www.xxx.yyy.zzz" [www.xxx.yyy.zzz].161
->                  community: "public"
->                 request ID: 848782246
->                PDU bufsize: 8000 bytes
->                    timeout: 2s
->                    retries: 5
->                    backoff: 1)
->
->The router has the following only line referencing snmp in it's
->configuration:
->
->snmp-server community public RO
->
->Does anyone know of any thing peculiar to this series of routers?
->
->cfgmaker still works just fine on my 2501.
->
->Thanks and regards,
->
->Bruce
->
->--
->Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
->Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
->Archive     http://www.ee.ethz.ch/~slist/mrtg
->
->

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg



More information about the mrtg mailing list