[mrtg] Re: MRTG Dies after Re-Boot

Service, Paul PSERVICE at aeb.org.uk
Wed Nov 3 17:08:55 MET 1999


The schedule service is starting automatically and is using the system
account.

-----Original Message-----
From: Stieers, Ken [mailto:KStieers at dainrauscher.com]
Sent: Wednesday, November 03, 1999 2:33 PM
To: 'Service, Paul'; 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] Re: MRTG Dies after Re-Boot


The AT command relies on the Schedule service.  Make sure the Schedule
service is started and is set to start up automatically. 

Ken 


****************************************
Ken Stieers
Lan Administrator
Dain Rauscher Information Services
(612)607-8924


> -----Original Message-----
> From: Service, Paul [mailto:PSERVICE at aeb.org.uk]
> Sent: Wednesday, November 03, 1999 8:14 AM
> To: 'mrtg at list.ee.ethz.ch'
> Subject: [mrtg] Re: MRTG Dies after Re-Boot
> 
> 
> I used the bat file off the MRTG site to schedule a stack of 
> Win AT's... Is
> this the same as running it from the CMD prompt? And do you therefore
> suggest that I need to log in to start it off again?! 
> 
> Is it somthing to do with it having missed a scheduled bat 
> whilst it was
> re-booting?
> 
> -----Original Message-----
> From: Stieers, Ken [mailto:KStieers at dainrauscher.com]
> Sent: Wednesday, November 03, 1999 1:04 PM
> To: 'Service, Paul'; 'mrtg at list.ee.ethz.ch'
> Subject: [mrtg] Re: MRTG Dies after Re-Boot
> 
> 
> Depends upon how you got MRTG polling every 5 minutes to 
> being with.  If you
> are using a batch file that is running in a CMD session you 
> have to log in.
> If you are using Jason Levine's MSU service, make sure the 
> service is set to
> start automatically (in Control Panel/Services). 
> 
> HTH, 
> 
> Ken
> 
> ****************************************
> Ken Stieers
> Lan Administrator
> Dain Rauscher Information Services
> (612)607-8924
> 
> 
> > -----Original Message-----
> > From: Service, Paul [mailto:PSERVICE at aeb.org.uk]
> > Sent: Wednesday, November 03, 1999 6:28 AM
> > To: 'mrtg at list.ee.ethz.ch'
> > Subject: [mrtg] MRTG Dies after Re-Boot
> > 
> > 
> > I'm running MRTG under NT 4.0, it's been working like a dream 
> > so far...
> > 
> > As i'm sure you are aware NT "likes" to be re-booted from 
> > time to time, one
> > of it's many "features". This seemed to stop MRTG dead.
> > 
> > Does anyone know how I can avoid this or how I can get things 
> > going again?
> > 
> > Any Ideas...?
> > 
> > >           \ \|/ /
> > >           ( o,o )
> > > ----oOO--------OOo----
> > Paul Service - Senior Support Analyst
> > Associated Examining Board
> > Email: pservice at aeb.org.uk - Tel: 01483 477592   -   Fax 
> 01483 300152
> > 
> > --
> > * To unsubscribe from the mrtg mailing list, send a message with the
> >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> > 
> 
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> 
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> 

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg


More information about the mrtg mailing list