[mrtg] Re: MRTG Dies after Re-Boot

[David C Prall]

Does the System Account have rights to the directory. Most likely it
doesn't.

David C Prall, MCNE MCSE          DCP Technologies
dcp at dcptech.com                       Alexandria, VA
dcppage at dcptech.com               http://www.dcptech.com
----- Original Message -----
From: Service, Paul <PSERVICE at aeb.org.uk>
To: <mrtg at list.ee.ethz.ch>
Sent: Wednesday, November 03, 1999 11:08 AM
Subject: [mrtg] Re: MRTG Dies after Re-Boot


> The schedule service is starting automatically and is using the system
> account.
>
> -----Original Message-----
> From: Stieers, Ken [mailto:KStieers at dainrauscher.com]
> Sent: Wednesday, November 03, 1999 2:33 PM
> To: 'Service, Paul'; 'mrtg at list.ee.ethz.ch'
> Subject: [mrtg] Re: MRTG Dies after Re-Boot
>
>
> The AT command relies on the Schedule service.  Make sure the Schedule
> service is started and is set to start up automatically.
>
> Ken
>
>
> ****************************************
> Ken Stieers
> Lan Administrator
> Dain Rauscher Information Services
> (612)607-8924
>
>
> > -----Original Message-----
> > From: Service, Paul [mailto:PSERVICE at aeb.org.uk]
> > Sent: Wednesday, November 03, 1999 8:14 AM
> > To: 'mrtg at list.ee.ethz.ch'
> > Subject: [mrtg] Re: MRTG Dies after Re-Boot
> >
> >
> > I used the bat file off the MRTG site to schedule a stack of
> > Win AT's... Is
> > this the same as running it from the CMD prompt? And do you
therefore
> > suggest that I need to log in to start it off again?!
> >
> > Is it somthing to do with it having missed a scheduled bat
> > whilst it was
> > re-booting?
> >
> > -----Original Message-----
> > From: Stieers, Ken [mailto:KStieers at dainrauscher.com]
> > Sent: Wednesday, November 03, 1999 1:04 PM
> > To: 'Service, Paul'; 'mrtg at list.ee.ethz.ch'
> > Subject: [mrtg] Re: MRTG Dies after Re-Boot
> >
> >
> > Depends upon how you got MRTG polling every 5 minutes to
> > being with.  If you
> > are using a batch file that is running in a CMD session you
> > have to log in.
> > If you are using Jason Levine's MSU service, make sure the
> > service is set to
> > start automatically (in Control Panel/Services).
> >
> > HTH,
> >
> > Ken
> >
> > ****************************************
> > Ken Stieers
> > Lan Administrator
> > Dain Rauscher Information Services
> > (612)607-8924
> >
> >
> > > -----Original Message-----
> > > From: Service, Paul [mailto:PSERVICE at aeb.org.uk]
> > > Sent: Wednesday, November 03, 1999 6:28 AM
> > > To: 'mrtg at list.ee.ethz.ch'
> > > Subject: [mrtg] MRTG Dies after Re-Boot
> > >
> > >
> > > I'm running MRTG under NT 4.0, it's been working like a dream
> > > so far...
> > >
> > > As i'm sure you are aware NT "likes" to be re-booted from
> > > time to time, one
> > > of it's many "features". This seemed to stop MRTG dead.
> > >
> > > Does anyone know how I can avoid this or how I can get things
> > > going again?
> > >
> > > Any Ideas...?
> > >
> > > >           \ \|/ /
> > > >           ( o,o )
> > > > ----oOO--------OOo----
> > > Paul Service - Senior Support Analyst
> > > Associated Examining Board
> > > Email: pservice at aeb.org.uk - Tel: 01483 477592   -   Fax
> > 01483 300152
> > >
> > > --
> > > * To unsubscribe from the mrtg mailing list, send a message with
the
> > >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> > >
> >
> > --
> > * To unsubscribe from the mrtg mailing list, send a message with the
> >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> >
> > --
> > * To unsubscribe from the mrtg mailing list, send a message with the
> >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> >
>
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
>
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
>
>

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg