[mrtg] Re: MRTG Dies after Re-Boot

[Service, Paul]

It does have rights to the dir and all works great until I re-boot, do you
think it may be somthing with the scheduler getting out of sync by missing a
schedule?

> -----Original Message-----
> From:	David C Prall [SMTP:dcp at dcptech.com]
> Sent:	03 November 1999 08:29
> To:	mrtg at list.ee.ethz.ch
> Subject:	[mrtg] Re: MRTG Dies after Re-Boot
> 
> Does the System Account have rights to the directory. Most likely it
> doesn't.
> 
> David C Prall, MCNE MCSE          DCP Technologies
> dcp at dcptech.com                       Alexandria, VA
> dcppage at dcptech.com               http://www.dcptech.com
> ----- Original Message -----
> From: Service, Paul <PSERVICE at aeb.org.uk>
> To: <mrtg at list.ee.ethz.ch>
> Sent: Wednesday, November 03, 1999 11:08 AM
> Subject: [mrtg] Re: MRTG Dies after Re-Boot
> 
> 
> > The schedule service is starting automatically and is using the system
> > account.
> >
> > -----Original Message-----
> > From: Stieers, Ken [mailto:KStieers at dainrauscher.com]
> > Sent: Wednesday, November 03, 1999 2:33 PM
> > To: 'Service, Paul'; 'mrtg at list.ee.ethz.ch'
> > Subject: [mrtg] Re: MRTG Dies after Re-Boot
> >
> >
> > The AT command relies on the Schedule service.  Make sure the Schedule
> > service is started and is set to start up automatically.
> >
> > Ken
> >
> >
> > ****************************************
> > Ken Stieers
> > Lan Administrator
> > Dain Rauscher Information Services
> > (612)607-8924
> >
> >
> > > -----Original Message-----
> > > From: Service, Paul [mailto:PSERVICE at aeb.org.uk]
> > > Sent: Wednesday, November 03, 1999 8:14 AM
> > > To: 'mrtg at list.ee.ethz.ch'
> > > Subject: [mrtg] Re: MRTG Dies after Re-Boot
> > >
> > >
> > > I used the bat file off the MRTG site to schedule a stack of
> > > Win AT's... Is
> > > this the same as running it from the CMD prompt? And do you
> therefore
> > > suggest that I need to log in to start it off again?!
> > >
> > > Is it somthing to do with it having missed a scheduled bat
> > > whilst it was
> > > re-booting?
> > >
> > > -----Original Message-----
> > > From: Stieers, Ken [mailto:KStieers at dainrauscher.com]
> > > Sent: Wednesday, November 03, 1999 1:04 PM
> > > To: 'Service, Paul'; 'mrtg at list.ee.ethz.ch'
> > > Subject: [mrtg] Re: MRTG Dies after Re-Boot
> > >
> > >
> > > Depends upon how you got MRTG polling every 5 minutes to
> > > being with.  If you
> > > are using a batch file that is running in a CMD session you
> > > have to log in.
> > > If you are using Jason Levine's MSU service, make sure the
> > > service is set to
> > > start automatically (in Control Panel/Services).
> > >
> > > HTH,
> > >
> > > Ken
> > >
> > > ****************************************
> > > Ken Stieers
> > > Lan Administrator
> > > Dain Rauscher Information Services
> > > (612)607-8924
> > >
> > >
> > > > -----Original Message-----
> > > > From: Service, Paul [mailto:PSERVICE at aeb.org.uk]
> > > > Sent: Wednesday, November 03, 1999 6:28 AM
> > > > To: 'mrtg at list.ee.ethz.ch'
> > > > Subject: [mrtg] MRTG Dies after Re-Boot
> > > >
> > > >
> > > > I'm running MRTG under NT 4.0, it's been working like a dream
> > > > so far...
> > > >
> > > > As i'm sure you are aware NT "likes" to be re-booted from
> > > > time to time, one
> > > > of it's many "features". This seemed to stop MRTG dead.
> > > >
> > > > Does anyone know how I can avoid this or how I can get things
> > > > going again?
> > > >
> > > > Any Ideas...?
> > > >
> > > > >           \ \|/ /
> > > > >           ( o,o )
> > > > > ----oOO--------OOo----
> > > > Paul Service - Senior Support Analyst
> > > > Associated Examining Board
> > > > Email: pservice at aeb.org.uk - Tel: 01483 477592   -   Fax
> > > 01483 300152
> > > >
> > > > --
> > > > * To unsubscribe from the mrtg mailing list, send a message with
> the
> > > >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > > > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> > > >
> > >
> > > --
> > > * To unsubscribe from the mrtg mailing list, send a message with the
> > >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> > >
> > > --
> > > * To unsubscribe from the mrtg mailing list, send a message with the
> > >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> > >
> >
> > --
> > * To unsubscribe from the mrtg mailing list, send a message with the
> >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> >
> > --
> > * To unsubscribe from the mrtg mailing list, send a message with the
> >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> >
> >
> 
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg