[mrtg] Re: Cisco 7500 POSIP reporting

[Leslie Harlley Watter]

Hi Lloyd !!

Try to use the option gauge on your mrtg.cfg.
This resolve my problem here

see you


        _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/
        _/                                              _/
        _/             Leslie Harlley Watter            _/
        _/                  15-Sep-1999                 _/
        _/                                              _/ 
        _/                                              _/
        _/  "Um Homem nao pode viver so de crimes.      _/ 
        _/   Precisa tambem de Afeto, Reconhecimento,   _/ 
        _/   estimulo e, de vez em quando,              _/ 
        _/       uma boa refeicao "                     _/ 
        _/                        Alfred Hitchcock      _/ 
        _/                                              _/ 
        _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/

On Wed, 15 Sep 1999, Lloyd Kwong wrote:

> Hi,
> 
> I am running MRTG version 2.8.2 and have been having a weird problem
> monitoring a very busy POS interface on a Cisco 7500 running 11.1(22)CC.
> When I first startup MRTG polling on the POS , it initially reports the
> correct inbound bit rate, but on the next interval, reports errantly
> low values.  For example, the first interval reports a correct inbound
> rate of 107 Mbits/sec, then the next interval will report the current
> inbound rate between 2-3 Mbits/sec.  Over the next few intervals, the
> rate increases to around 15-20 Mbits, but it is still way off the actual
> 107+ Mbit rate.
> 
> However, the outbound rate is reported correctly the whole time, which
> is approx 40 Mbits/Sec.
> 
> Any idea what is causing the discrepency?   I also monitor 100+ other
> routers without any problems.  The POS is by far the busiest interface
> (traffic wise) that I monitor though.
> 
> Lloyd
> ------------------------------------------------------------------------
> Lloyd Kwong	      +       University of Toronto
> lsk at onet.on.ca	    + + +     Network & Operations Services
> (416) 978-1720 	      +       4 Bancroft Ave, Room 101, Toronto M5S 1A1
> ------------------------------------------------------------------------
> 
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> 

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg