[mrtg] Re: MRTG config problems

[Daniel R . Kilbourne]

MRTG target format:


OID&OID:string at ip.of.box

so, in this case, (also need no leading '.')

 Target[hurley]: 1.3.6.1.2.1.2.2.1.14&1.3.6.1.2.1.2.2.1.20:xxxxxxx at xxx.xxx.xxx.xxx
 MaxBytes[hurley]: 12500000
 Options[hurley]: growright
 Title[hurley]: hurley (if-errors): FastEthernet1/1
 PageTop[hurley]: <H1>Traffic Analysis for FastEthernet1/1
  </H1>
  <TABLE>
    <TR><TD>System:</TD><TD>hurley in </TD></TR>
    <TR><TD>Maintainer:</TD><TD></TD></TR>
    <TR><TD>Interface:</TD><TD>FastEthernet1/1 (5)</TD></TR>
    <TR><TD>IP:</TD><TD></TD></TR>
    <TR><TD>Max Speed:</TD>
        <TD>100Mbits/s (ethernetCsmacd)</TD></TR>
   </TABLE>

Would graph what you want





Alison Gudgeon wrote:
> 
> Hi All,
> 
> I am currently trying to get an MRTG script written to log interface errors
> on a cisco7200.
> 
> My interface number (index value) is 5
> My mib string for interface errors is 1.3.6.1.2.1.2.2.1.14 and
> 1.3.6.1.2.1.2.2.1.20
> 
> Target[hurley]: .1.3.6.1.2.1.2.2.1.14:xxxxxxx at xxx.xxx.xxx.xxx
> MaxBytes[hurley]: 12500000
> Options[hurley]: growright
> Title[hurley]: hurley (if-errors): FastEthernet1/1
> PageTop[hurley]: <H1>Traffic Analysis for FastEthernet1/1
>  </H1>
>  <TABLE>
>    <TR><TD>System:</TD><TD>hurley in </TD></TR>
>    <TR><TD>Maintainer:</TD><TD></TD></TR>
>    <TR><TD>Interface:</TD><TD>FastEthernet1/1 (5)</TD></TR>
>    <TR><TD>IP:</TD><TD></TD></TR>
>    <TR><TD>Max Speed:</TD>
>        <TD>100Mbits/s (ethernetCsmacd)</TD></TR>
>   </TABLE>
> 
> I'd like my graph to map both errors IN and errors OUT
> 
> I have tried a variety of combinations in the target mib string but i get
> errors along the lines of
> 
> SNMPGET Problem for .1.3.6.1.2.1.2.1.5.0 .1.3.6.1.2.1.2.2.1.14 sysUptime
> sysName on xxxxx at xxx.xxx.xxx.xxx
> SNMPGET: Failed to reach target:
> "mailto:.1.3.6.1.2.1.2.1.5.0&.1.3.6.1.2.1.2.2.1.14:xxxxx at xxx.xxx.xxx.xxx. I
> tried multiple times!
> 
> Can anyone point me in the right direction - I have a feeling that I am
> missing something fundamental here....
> I know with the sample of the config file that i provide above that i do not
> reference the index value - so how do i do that???? I've tried putting it on
> the end and also adding it infront of the string for IF errors.... : (
> 
> Thanks very much in advance
> 
> Alison
> 
> 
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 

-- 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Daniel R. Kilbourne
daniel.kilbourne at voyager.net
Voyager.net Network Engineer

^^^^^^^^^^^^^^^^^^^^^^^^^^^^

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi