[mrtg] Re: MRTG & Cisco 720X... :(

Enerson, Marty menerso at marketwatch.com
Wed Aug 23 22:09:15 MEST 2000


Ok, this is screwed.  I loaded the config like you had it on three of my
7206's and it worked on one of them, but didn't work on the other two.
There is nothing that is same among the two that don't work that is
different from the one that does.  F'd up.




Doesn't Work!!!!!!!!
ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105],
DEVELOPMENT SOFTWARE

cisco 7206VXR (NPE300) processor (revision B) with 122880K/40960K bytes of
memory.
R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache

----------------------------------------------------------------------------
------------------------
Doesn't Work!!!!!!!!
ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105],
DEVELOPMENT SOFTWARE

cisco 7206VXR (NPE300) processor (revision D) with 155648K/40960K bytes of
memory.
R7000 CPU at 262Mhz, Implementation 39, Rev 2.1, 256KB L2, 2048KB L3 Cache

----------------------------------------------------------------------------
------
Works!!!!!!!
ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105],
DEVELOPMENT SOFTWARE

cisco 7206VXR (NPE300) processor (revision B) with 122880K/40960K bytes of
memory.
R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache










-----Original Message-----
From: Matthew S. Krawitz [mailto:matthewk at nationalairlines.com]
Sent: Wednesday, August 23, 2000 1:58 PM
To: Mrtg
Subject: [mrtg] MRTG & Cisco 720X... :(



I'm trying to get MRTG to watch the temperature on my 7206 router...

I've walked through the "enterprise" mibs and found the temp values.

When I 'snmpget <router IP> public .1.3.6.1.4.1.9.9.13.1.3.1.3.1',
or 'snmpget <router IP> public .1.3.6.1.4.1.9.9.13.1.3.1.3.2 - I get
usable values.

When I run the following script:

  WorkDir: <path to wd>
  Refresh: 300
  Interval: 5
  WriteExpires: yes

  Target
[router]: .1.3.6.1.4.1.9.9.13.1.3.1.3.1&.1.3.6.1.4.1.9.9.13.1.3.1.3.4:pu
blic@<router IP>
  Directory[router]: temp
  WithPeak[router]: wmy
  YLegend[router]: Degrees C
  ShortLegend[router]: &deg;C
  MaxBytes[router]: 50
  Options[router]: nopercent, growright, gauge
  Unscaled[router]: dwmy
  AbsMax[router]: 50
  Title[router]: 'Router (7206) Temp'
  Colours[router]: GREEN#00eb0c,BLUE#1000ff,BLUE#1000ff,VIOLET#ff00ff
  Legend1[router]: Average 1 minute Inlet Temperature
  Legend2[router]: Average 1 minute Outlet Temperature
  Legend3[router]: Average 5 minute Inlet Temperature
  Legend4[router]: Average 5 minute Outlet Temperature
  LegendI[router]: &nbsp;Inlet:
  LegendO[router]: &nbsp;Outlet:
  PageTop[router]: <H1> Temperature - Degrees C
   <BR></H1>
   <TABLE>
     <TR><TD>System:</TD><TD>Router</TD></TR>
     <TR><TD>Maintainer:</TD><TD>NetOps</TD></TR>
    </TABLE>

(many thanks for the script, BTW...  I didn't create it...  I don't
remember who did...  but I didn't)

NO values get read.  The temp is listed perpetually at 0 degrees...
when my own snmpget attempts yield real results 100% of the time.

mrtg 2.9.0pre22
ucd-snmp-4.1.2
Solaris 8
Cisco IOS 11.3T


HELP!@!!!!   :)

--

 - matthewk (MSK2)


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list