[mrtg] Re: SNMP error No response

[Mike Butler]

Are you running through the firewall? If so, have a look at the following 
document:

http://www.cisco.com/warp/public/110/pixsnmp.html

and search for "SNMP through the PIX" to ensure that the PIX is correctly 
configured to allow 161/udp (and 162/udp for traps) through.
Cheers,

Michael 

> I am a first time MRTG user trying to monitor Cisco 7200 routers on
> WinNT platform. When I run the command:
> 
> perl cfgmaker public at 10.10.10.1 --global "WorkDir: c:\www\mrtg"
> --output mrtg.cfg
> 
> I get SNMP error
> No response from the device.
> 
> I have been told that the community string is public.
> Could this be down to pix firewall configuration.
> 
> Thank you in advance,
> 
> adriano
> 
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


-- 
Mike Butler
mike at michaelbutler.net


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi