[mrtg] Re: Adding mibs to config file

[Alan Rader]

I added this to my config file

Target[10.0.9.50]:
.1.3.6.1.2.1.16.1.1.1.13.1&.1.3.6.1.2.1.16.1.1.1.13.2public at 10.0.9.50 which
should be collisions on port 1 and 2 of one of our switches.  I have MRTG
running on NT and as a service using Firedaemon.  I stopped the service
running that config and restarted it.  I don't see my new entry.  Is there
something else or different I have to do to get it to show up?

Thanks



Alan Rader
Finish Line, Inc.
Network Administrator
arader at finishline.com
317-899-1022 x3529


-----Original Message-----
From: David.R.Oslager at BakerNet.com [mailto:David.R.Oslager at BakerNet.com]
Sent: Monday, December 11, 2000 11:31 AM
To: pwilliamson at MANDTBANK.COM; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Adding mibs to config file



Here is an example of graphing the CPU utilization (1min & 5Min) of a cisco
router.

Target[xxxxxxxxxxx]:
1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.1.58.0:xxxxx at 123.456.789.123

use a + between the OIDS if you want to add them together as one object. you
need to have two objects to be graphed. that's just the way MRTG works.

HTH,

Dave O.

-----Original Message-----
From: Paul C. Williamson [mailto:pwilliamson at MANDTBANK.COM]
Sent: Monday, December 11, 2000 10:14 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Adding mibs to config file



Alan, there is no copy in GETIF.  Bummer, it needs to be 
implemented.  The OID is the number and the MIB is pseudo-
english representation of the OID.  

Just type in the number (2x if you only want to monitor 1 target 
on the graph in question), restart mrtg with that cfg and you're
all set.

Paul
>>> Alan Rader <arader at finishlines.com> 12/11/00 11:01AM >>>

Sorry, I think I left something out.  In getif, I see something I want to
monitor with MRTG, so then can I just cut and past that long number into a
mrtg.cfg file and stop and start it to start graphing that?

Thanks


Alan Rader
Finish Line, Inc.
Network Administrator
arader at finishline.com 
317-899-1022 x3529


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi