[mrtg] Error in making config file

[lucino]

Hi,

I execute below command but there seems to be errors.

----------------------------------------------------------------------
C:\MRTG\mrtg-2.8.12\run>perl cfgmaker public at 192.168.0.1 > 1.cfg
SNMP Error:
receiving response PDU: Unknown error
SNMPv1_Session (remote host: "192.168.0.1" [192.168.0.1].161
                  community: "public"
                 request ID: 926877706
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for sysDescr sysContact sysName sysLocation ifNumber 
sysObjectID on public at 192.168.0.1
SNMP Error:
receiving response PDU: Unknown error
SNMPv1_Session (remote host: "192.168.0.1" [192.168.0.1].161
                  community: "public"
                 request ID: 1960839469
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMP Error:
receiving response PDU: Unknown error
SNMPv1_Session (remote host: "192.168.0.1" [192.168.0.1].161
                  community: "public"
                 request ID: 1960839470
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
----------------------------------------------------------------------

environment:
192.168.0.1 Router(ISDN Dialup Router NTT-ME MN128SOHO)
192.168.0.2 Windows2000 PC (I executed this command on this PC)
192.168.0.3 Windows98 PC
Switching HUB 10/100 (connecting with above three devices)

Would you teach me how I can correct this errors?

---
lucino at japan
lucino at hikoboshi.net
---

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg