[mrtg] Re: Help with connecting to a Cisco 2610 series router

[Bryan Socha]

Sorry I didn't read my mailing list mails...

This one got me also with the 7507 and the 8540's.

You can poll anything you want with a read only variable, but you need to
have an SNMP String setup for the view.  Exact command below:

snmp-server community yourstring view v1default RO

in this example you would run cfgmaker with yourstring at routerip


Bryan Socha
Network Engineer
UGO Networks, Inc.

Phone: 212-624-3362
Cell: 917-439-5503

-----Original Message-----
From: Bruce B. Platt [mailto:bbp at comport.com]
Sent: Tuesday, December 28, 1999 5:39 PM
To: Srinivas Chuthari; Bruce B. Platt; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Help with connecting to a Cisco 2610 series router


At 01:59 PM 12/28/1999 -0800, Srinivas Chuthari wrote:

Nope, no access lists.

Thanks for your reply


->Do you have any access-lists in the configuration ...?
->
->Sreeni
->
->-----Original Message-----
->From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
->Behalf Of Bruce B. Platt
->Sent: Tuesday, December 28, 1999 1:48 PM
->To: mrtg at list.ee.ethz.ch
->Subject: [mrtg] Help with connecting to a Cisco 2610 series router
->
->
->I am successfully running mrtg with my Cisco 2501 running IOS v 11.3.
->
->We just received a Cisco 2611 and I'd like to monitor that as well.
->
->When I run cfgmaker I get no response from the Cisco 2611.  I have used
the
->snmp community string as
->shown by the show config command and cfgmaker fails as follows:
->
->SNMP Error:
->no response received
->SNMPv1_Session (remote host: "www.xxx.yyy.zzz" [www.xxx.yyy.zzz].161
->                  community: "public"
->                 request ID: 1955278080
->                PDU bufsize: 8000 bytes
->                    timeout: 2s
->                    retries: 5
->                    backoff: 1)
->SNMPGET Problem for sysDescr sysContact sysName sysLocation ifNumber
->sysObjectID on public at www.xxx.yyy.zzz
->SNMP Error:
->no response received
->SNMPv1_Session (remote host: "www.xxx.yyy.zzz" [www.xxx.yyy.zzz].161
->                  community: "public"
->                 request ID: 848782245
->                PDU bufsize: 8000 bytes
->                    timeout: 2s
->                    retries: 5
->                    backoff: 1)
->SNMP Error:
->no response received
->SNMPv1_Session (remote host: "www.xxx.yyy.zzz" [www.xxx.yyy.zzz].161
->                  community: "public"
->                 request ID: 848782246
->                PDU bufsize: 8000 bytes
->                    timeout: 2s
->                    retries: 5
->                    backoff: 1)
->
->The router has the following only line referencing snmp in it's
->configuration:
->
->snmp-server community public RO
->
->Does anyone know of any thing peculiar to this series of routers?
->
->cfgmaker still works just fine on my 2501.
->
->Thanks and regards,
->
->Bruce
->
->--
->Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
->Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
->Archive     http://www.ee.ethz.ch/~slist/mrtg
->
->

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg