[mrtg] Re: Thresh Holds on NT

[Garth K. Williams]

Yeah.  I got it a bunch while I was debugging my Threshold scripts.  Once
they were done the messages stopped appearing.  I THINK it has something to
do with passing %1, %2 and %3 across too many processes.

Feel free to use my stuff if you want (might save you some time), and you
can see it in action (sort of) at http://www.wtcs.org/snmp4tpc/threshld.htm.

Later!

Garth K. Williams

Email: garth.williams at home.com
       garth.williams at wtcs.org
Web: http://www.wtcs.org/snmp4tpc
----------------------------------------------------
Home of "SNMP for the Public Community"
Support Site for SNMP, Windows NT, NetWare and MRTG
----------------------------------------------------


> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch
> [mailto:mrtg-bounce at list.ee.ethz.ch]On
> Behalf Of Miller Anthony (RBAU/ISY)
> Sent: Wednesday, January 12, 2000 2:33 PM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Thresh Holds on NT
> Importance: High
>
>
> Good morning guru's (or afternoon for some)
>
> I was wondering whether if any of you had ever seen a message
> like this
> before.....
>
> "The process was trying to write to a nonexistant pipe"
>
> I get this message 5 times before the mrtgkick.bat finishes,
> and only after
> running the
> .cfg that contains the ThreshProgO commands.
>
> (2.8.3/NTSP4)
>
> I only get this if the ThreshMaxO is reached and the batch
> file is called
> using ThreshProgO. If the threshhold has not been reached I do not
> get this message at all.
>
> The batch file called by ThreshProgO seems to run fine. I can
> force it to
> run by
> dropping the ThreshMaxO value and I think all is well.
>
> Here is a sample if the suspect .cfg
>
> Target[nz]: 8:public at xxx.xxx.xxx.xx
> MaxBytes[nz]: 1000
> AbsMax[nz]: 16000
> Title[nz]: PVC to Auckland (BT-CISCO-2500)
> PageTop[nz]: <H1>Traffic Analysis for Serial0.5
>  <BR> PVC to Auckland </H1>
>  <TABLE>
>    <TR><TD>System:</TD><TD>BT-CISCO-2500</TD></TR>
>    <TR><TD>Maintainer:</TD><TD>BT Australiasia</TD></TR>
>    <TR><TD>Interface:</TD><TD>Serial0.5 (8)</TD></TR>
>    <TR><TD>Max Speed:</TD>
>        <TD>8K CIR  (frame-relay)</TD></TR>
>   </TABLE>
> Options[nz]: bits
> WithPeak[nz]: ymw
> UnScaled[nz]: ymwd
> ThreshMaxO[nz]: 1000
> ThreshProgO[nz]: c:\mrtg-2.8.3\run\ThreshOverNZ.bat
>
>
> Comments?
>
> regards
> Anthony Miller
> ===============================
> Network Engineer
> Information Systems Department
> Robert Bosch (Australia) Pty. Ltd.
> 1555 Centre Road, Clayton, Victoria, Australia, 3168
> Tel. : +61 3 9541 7824          Fax : +61 3 9541 5284
> E-mail : anthony.miller at au.bosch.com
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
> Archive     http://www.ee.ethz.ch/~slist/mrtg
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg