[mrtg] Re: Thresholds no logging in ThreshDir

[SEGUIN, RONALD]

Here is my config.

WorkDir: /capacity/bai_cap/reports/core_gsr
ThreshDir: /capacity/bai_cap/thresholds
Refresh: 300
Interval: 15
#--------------------------------------------------------
Title[^]: Traffic Analysis for
Target[core1-toronto63_atm8_0-33]:
`/capacity/bai_cap/scripts/get_bai_gsr core1-toronto63 ATM8/0.33`
MaxBytes[core1-toronto63_atm8_0-33]: 1250000
Options[core1-toronto63_atm8_0-33]: bits
ThreshMaxI[core1-toronto63_atm8_0-33]: 1000000
ThreshMaxO[core1-toronto63_atm8_0-33]: 1000000
ThreshProgI[core1-toronto63_atm8_0-33]:
/capacity/bai_cap/scripts/send_notifyIn.pl
ThreshProgO[core1-toronto63_atm8_0-33]:
/capacity/bai_cap/scripts/send_notifyOut.pl
Title[core1-toronto63_atm8_0-33]: core1-toronto63 ATM8/0.33 10 Mbps
PageTop[core1-toronto63_atm8_0-33]: <center><B>CLIENT:Nexxia GSR
PVC<br>DEVICE:core1-toronto63<br>INTERFACE:ATM8/0.33<br>INTERFACE
DESC:<br>SPEED:10 Mbps</B></center>
WithPeak[core1-toronto63_atm8_0-33]: dwmy 
XSize[core1-toronto63_atm8_0-33]: 500
Ysize[core1-toronto63_atm8_0-33]: 200
Colours[core1-toronto63_atm8_0-33]:
GREEN#00cc00,BLUE#0000ff,RED#8b0000,VIOLET#ff00ff 
YLegend[core1-toronto63_atm8_0-33]: Bits Per Second 
ShortLegend[core1-toronto63_atm8_0-33]: b/s
Legend1[core1-toronto63_atm8_0-33]: Incoming Bits Per Second 
Legend2[core1-toronto63_atm8_0-33]: Outgoing Bits Per Second 
Legend3[core1-toronto63_atm8_0-33]: Maximal (15 min) Incoming Traffic 
Legend4[core1-toronto63_atm8_0-33]: Maximal (15 min) Outgoing Traffic 
LegendI[core1-toronto63_atm8_0-33]: &nbsp;In
LegendO[core1-toronto63_atm8_0-33]: &nbsp;Out
Timezone[core1-toronto63_atm8_0-33]: Canada/Eastern 

"Scheidel, Greg" wrote:
> 
> I have seen this problem, but only when there was a problem with my config.
> Can you post your config?
> 
> Greg S.
> 
> -----Original Message-----
> From: SEGUIN, RONALD [mailto:ronald.seguin at bellnexxia.com]
> Sent: Friday, January 21, 2000 11:12 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Thresholds no logging in ThreshDir
> 
> Hi,
> 
> I'm running mrtg-2.8.8 on Solaris 2.5.1.  I have my thresholds firing
> off e-mails, however, nothing is being written in the ThreshDir.  Has
> anyone else came across this problem??
> 
> Thanks,
> --
> *********************************
> Ron Seguin
> IS/IT Development
> Bell Nexxia
> 
> (613)781-2555 (voice)
> (613)781-1453 (fax)
> ronald.seguin at bellnexxia.com
> 
> Intranet Home Page:
> 
> http://intranet.bellnexxia.com/personal_Home_Pages/php_display.asp?pein=I166
> 2
> *********************************
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
> Archive     http://www.ee.ethz.ch/~slist/mrtg

-- 
*********************************
Ron Seguin
IS/IT Development
Bell Nexxia

(613)781-2555 (voice)
(613)781-1453 (fax)
ronald.seguin at bellnexxia.com

Intranet Home Page:

http://intranet.bellnexxia.com/personal_Home_Pages/php_display.asp?pein=I1662
*********************************

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg