[mrtg] Re: Cisco 2600 Temperature

[Leif Neland]

----- Original Message ----- 
From: "Marc-Adrian Napoli" <marcadrian at cia.com.au>
To: "Wim van Weert" <wim.van.weert at wagenborg.com>
Cc: <mrtg at list.ee.ethz.ch>
Sent: Monday, January 24, 2000 1:31 AM
Subject: [mrtg] Re: Cisco 2600 Temperature


> Hi there,
> 
> > Jeremy,
> >
> > you can all find it at
> http://www.cisco.com/public/mibs/oid/CAT2600-MIB.oid
> 
> I don't understand this MIB. Most of those values don't live on my 2600's -
> anyone else have similar results?
> 
> "cisco"         "1.3.6.1.4.1.9"
> "catProd"               "1.3.6.1.4.1.9.1"
> "cat2600"               "1.3.6.1.4.1.9.1.111"

> I tried to walk .1.3.6.1.4.1.9.1 and got nothing.


It doesn't work either here:
> show version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(3)T3,  RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 15-Apr-99 15:41 by kpma
Image text-base: 0x80008088, data-base: 0x80693A88

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

cisco4 uptime is 2 weeks, 3 days, 17 hours, 30 minutes
System restarted by power-on
System image file is "flash:c2600-i-mz.120-3.T3"

cisco 2620 (MPC860) processor (revision 0x102) with 18432K/6144K bytes of memory
.
Processor board ID JAB033803V2 (1277024213)
M860 processor: part number 0, mask 49
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
1 FastEthernet/IEEE 802.3 interface(s)
3 Serial network interface(s)
2 Serial(sync/async) network interface(s)
1 Channelized E1/PRI port(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg