[mrtg] Livingston IRX PortMaster Internetwork Router supported in MRTQ version 2.8.9?

[Jack Barnett]

Hi,

Is the Livingston Portmaster IRX Routers supported by MRTG?  I see the
contrib for for other portmaster version, but not this one.  When I run it I
get the error: (IP addresses have been changed to protect the innocent)

-axil~/public_html/cgi-bin/stop -->./cfgmaker public at 192.168.17.1 >
mrtg.conf
NMP Error:
o response received
NMPv1_Session (remote host: "192.168.17.1" [192.168.17.1].161
                 community: "public"
                request ID: 2043538689
               PDU bufsize: 8000 bytes
                   timeout: 2s
                   retries: 5
                   backoff: 1)
NMPGET Problem for
sysDescr sysContact sysName sysLocation ifNumber sysObjectID on
public at 192.168.17.1

NMP Error:
o response received
NMPv1_Session (remote host: "192.168.17.1" [192.168.17.1].161
                 community: "public"
                request ID: 1476472675
               PDU bufsize: 8000 bytes
                   timeout: 2s
                   retries: 5
                   backoff: 1)
NMP Error:
o response received
NMPv1_Session (remote host: "192.168.17.1" [192.168.17.1].161
                 community: "public"
                request ID: 1476472676
               PDU bufsize: 8000 bytes
                   timeout: 2s
                   retries: 5
                   backoff: 1)

Anyone know what this means?  It is working with one of the Cisco routers
here, so I know that MRTQ is working correctly, I know it is something to do
with the Livingston, but don't know exactly what.

Thanks,
Jack


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg