[mrtg] Mrtg CISCO 2948

Tue Jan 25 20:04:56 MET 2000


	Did anyone ever setup MRTG w/ a CISCO 2948 ios 4.4(1) to poll one of
the ports for bandwidth usage.  When I use cfgmaker it grabe the SNMP info
but the port that I want to poll is rem# out & it thinks that the port is
admin doen or wrong line speed.      Did  anybody ever have success with
this?

Domenick Villamagna
Network Engineer
212-381-5840
dvillamagna at doubleclick.net

> -----Original Message-----
> From:	Dan Spray [SMTP:cpdans at conpoint.com]
> Sent:	Tuesday, January 25, 2000 11:04 AM
> To:	mrtg at list.ee.ethz.ch
> Subject:	[mrtg] Options question
> 
> I set the options to bits but it didn't change my graphs.  Anyone have any
> ideas.  The following is a copy of one of my targets.
> 
> Target[206.29.77.1.1]: 1:xxxxxxxx at 206.29.77.1
> MaxBytes[206.29.77.1.1]: 1250000
> Options[_]: bits
> Title[206.29.77.1.1]: tnt01 (206.29.77.1): Ethernet Slot Shelf
> PageTop[206.29.77.1.1]: <head><meta http-equiv="refresh"
> content="300"></head><H1>Traffic Analysis for Ethernet Shelf Slot
>  </H1>
>  <TABLE>
>    <TR><TD>System:</TD><TD>tnt01 at Connecting Point Norfolk, NE</TD></TR>
>    <TR><TD>Maintainer:</TD><TD>Dan Spray</TD></TR>
>    <TR><TD>Interface:</TD><TD>Ethernet Slot 17/1 (1)</TD></TR>
>    <TR><TD>IP:</TD><TD>(206.29.77.1)</TD></TR>
>    <TR><TD>Max Speed:</TD>
>        <TD>1250.0 kBytes/s (ethernetCsmacd)</TD></TR>
> 
> Thanks for the help
>   </TABLE>
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg