[mrtg] Re: Help with MAX TNT IDSL ports

["Helmert, Jörg"]

Hi,

don't know if it helps...

there is an application available called
NavisAccess.

Its available as standalone version and as
HPOv integrated version.

I have tested it as standalone only (not used
in production environment...).

Was too expensive for us.

bye,

 Joerg Helmert
 

-----Original Message-----
From: Mike Zheng [mailto:zhengm2000 at yahoo.com]
Sent: Montag, 3. Juli 2000 23:00
To: Helmert,_Jrg; 'Hoomaan Naimi'; mrtg at list.ee.ethz.ch
Subject: Re: [mrtg] Re: Help with MAX TNT IDSL ports


Hi, 
I have a related issue which you might have the answer
for it.
We were monitoring MAX 6000 and MAX 4000 boxes over a
wide area as an ISP. We only care about the status of
the PRI interfaces which are facing the clients. Do
you, or anyone, know how to get the status of those
PRI interfaces only without inserting those 200+
virtual interfaces into OpenView database? Currently,
we have to turn off SNMP agents on the MAX from HP
OpenView to limit the Object database size.
Thanks in advance for your help.

Mike Zheng
Network Administrator
MK International, LLC

--- "Helmert,_Jörg"
<Joerg.Helmert at Computer-Partner.DE> wrote:
> 
> Hi,
> 
> first of all, I'm monitoring some MAX 6000. But I
> think 
> implementation of SNMP will be the same on TNT's.
> 
> On our Ascend Routers (including Pipelines), an
> active 
> Connection Profile is bound to a logical interface
> (thats how I call it...). The logical interface is
> bound
> to a physical one.
> Unfortunately IfOctet Values only show up on the
> logical
> ones.
> Why unfortunately?
> Oh, our MAX has listed 215 interfaces in the
> ifTable.
> Almost 180 or so are logical ones. Everytime a
> connection
> is made, a random logical interface is choosen...
> 
> If you search for Ascend on the list, you'll get
> many posts
> which show resulting problems.
> 
> If you only want to sum up that values you can do
> that with
> mrtg (some examples for P50 on the list. Will work
> for other
> ascends to, but adding 180 interfaces might be
> somewhat too
> much...).
> 
> Following are the logical interfaces I'm speaking
> of:
> wanidle0: every inactive Connection Profile is bound
> to this
> wanxxx: xxx = three digits; an active Profile will
> be bound 
>         to one of them...
> 
> If you run cfgmaker you'll get all Interfaces. The
> inactive
> ones are remarked. The active ones will work.
> But these are only the active ones at the moment you
> run
> cfgmaker. So be warned. A now working config will
> show
> zero values some time later (hours up to weeks
> later...).
> Depends on how often your interfaces change from
> active
> to inactive and back...
> 
> bye,
> 
>  Joerg Helmert
>  
> -----Original Message-----
> From: Hoomaan Naimi [mailto:naimi at afranet.com]
> Sent: Montag, 3. Juli 2000 04:04
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Help with MAX TNT IDSL ports
> 
> 
> 
> Hi all,
> I have a MAX TNT with 32 port  IDSL module. I have
> enabled SNMP on the
> box.But "ifInOctets" and "ifOutOctets"
> returned for these ports are always zero ( Despite
> The Ethernet
> corresponding variables that are valid values).
> Those anybody have a idea about the problem ?
> Thanks in advance.
> 
> Best Regards
> Hoomaan Naimi
> Network Administrator
> Afranet Co.
> 
> 
> --
> Unsubscribe
>
mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage    
> http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 
> --
> Unsubscribe
>
mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage    
> http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 


__________________________________________________
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi