[mrtg] Re: ATM sub-interfaces on Cisco 7505

[Tajima Hirotaka]

Hi Charles,thank you for your comments.

From: "Charles Franks" <Charlz at lvcablemodem.com>
Subject: Re: [mrtg] ATM sub-interfaces on Cisco 7505

> If you go into the router and do a
> show interface for the ATM port and all its sub interfaces, you will see
> the utilization is listed exactly the same for all of them.

in our Cisco router(IOS:11.2):
#show interface
  ...
  ATM5/0.2 is up, line protocol is up
  ATM5/0.3 is up, line protocol is up
  ...

we can see all sub interfaces,but cannot get MIBs
information of sub-interfaces:
% snmpwalk 10.27.{xxx,yyy}.253 public interfaces
  ...
  interfaces.ifTable.ifEntry.ifDescr.12 = ATM5/0-atm layer
  interfaces.ifTable.ifEntry.ifDescr.13 = ATM5/0-aal5 layer
  ...

Do you have the technique to get these's MIBs on MRTG?


otherwise, another Cisco router(IOS:12.0),we can. IOS problems??

% snmpwalk 10.27.zzz.253 public interfaces
  interfaces.ifTable.ifEntry.ifDescr.7 = ATM1/0/0-atm layer
  interfaces.ifTable.ifEntry.ifDescr.8 = ATM1/0/0.0-atm subif
  interfaces.ifTable.ifEntry.ifDescr.9 = ATM1/0/0-aal5 layer
  interfaces.ifTable.ifEntry.ifDescr.10 = ATM1/0/0.0-aal5 layer
  interfaces.ifTable.ifEntry.ifDescr.11 = Null0
  interfaces.ifTable.ifEntry.ifDescr.12 = ATM1/0/0.1-atm subif
  interfaces.ifTable.ifEntry.ifDescr.13 = ATM1/0/0.1-aal5 layer
  ...


> Currently I am looking into third party devices that sit on the ATM
> circuit before it gets into the router and report utilization by PVC,
> up/down events etc.

Wow!if you have that infomation,tel me please.

thanks,

-----
Tajima Hirotaka
hirochan-ml at yubin.net

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi