[mrtg] Re: proper computation

[Rogier Pelzer]

Hi noca,

This means that the line is not used for 100%, this means that it's OK.
The graph will go up if you use more of the bandwith.
If you do a copy of al large file you will, see.
Als if it's a Cisco you can check with SH INT <the one you want> and look at
the 5 min avaridge.


Greets,

Rogier
----- Original Message -----
From: "noca" <nocause at cbu.onevirtual.com>
To: <mrtg at list.ee.ethz.ch>
Sent: Wednesday, July 05, 2000 5:50 PM
Subject: [mrtg] proper computation


>
>
> Guys,
> i have a problem regarding mrtg coz
> i have 128 k leased line and 64 k leased line connection. in mrtg.cfg i
set
> the MAXBYTES 128 k leased line to 16000 and the 64k leased to MAX BYTES
> 8000. But in the graph the 128 K it displays only 92k
> and 40 k in the 64 connection, is there a problem in the computation. or
in
> the configuration
>
>
> any suggestion and recommendation
>
> thanks
>
> Rook
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi