[mrtg] catalyst 35-48 XL

[Michael Coburn]

Sorry for no subject in the previous message:

I'm trying to gather traffic on each port on a Catalyst 3548-XL.  I want to
see how much traffic is going over each port.  I tried to run cfgmaker
against the switch with the following results.  I think that I have SNMP
enabled on the switch but I must be wrong.  Any help would be great

D:\mrtg\run>perl cfgmaker public at 10.6.0.3 > mrtg3.cfg
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.6.0.3" [10.6.0.3].161
                  community: "public"
                 request ID: 914835146
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for sysDescr sysContact sysName sysLocation ifNumber
sysObjectID
 on public at 10.6.0.3
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.6.0.3" [10.6.0.3].161
                  community: "public"
                 request ID: 1552684193
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.6.0.3" [10.6.0.3].161
                  community: "public"
                 request ID: 1552684194
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)


Michael Coburn
Network Manager
1.718.380.6653
http://www.mailbits.com

Michael Coburn
Network Manager
1.718.380.6653
http://www.mailbits.com




--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi