[mrtg] Cisco Memory Graph Issues

[Billingsley, Richard, CON, OASD(HA)/TMA]

I am having trouble graphing the right memory usage in MRTG.  Why does the
graph show current used 356.8MB of memory  Please help.  I provided:  My
"sho version", the graph display, and my config information.

the information lines state the following:

Max Used 357.0 Mb/s (79.5%) Average Used 346.9 Mb/s (77.3%) Current Used
356.8 Mb/s (79.5%) 
Max Free 118.3 Mb/s (26.3%) Average Free 102.0 Mb/s (22.7%) Current Free
92.1 Mb/s (20.5%) 

In my cfg file I have:

MaxBytes[MY_ROUTER01.mem]: 56113080

When I do a "sho version"  I get the following:

MY_ROUTER01#sh version
Cisco Internetwork Operating System Software
IOS (tm) GS Software (RSP-J-M), Version 11.1(8), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Thu 05-Dec-96 11:36 by tamb
Image text-base: 0x600108A0, data-base: 0x6075A000

ROM: System Bootstrap, Version 11.1(2) [nitin 2], RELEASE SOFTWARE (fc1)
ROM: GS Software (RSP-JV-M), Version 11.1(6), RELEASE SOFTWARE (fc1)

MY_ROUTER01 uptime is 23 weeks, 4 days, 3 hours, 14 minutes
System restarted by error - a SegV exception, PC 0x6010DA78 at 08:04:01 UTC
Sun Sep 26 1999
System image file is "slot0:rsp-j-mz.111-8", booted via slot0
Host configuration file is "hartrdmz01-confg", booted via tftp from
164.65.182.15

cisco RSP2 (R4600) processor with 65536K bytes of memory.
R4700 processor, Implementation 33, Revision 1.0
Last reset from power-on
G.703/E1 software, Version 1.0.
SuperLAT software copyright 1990 by Meridian Technology Corp).
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
TN3270 Emulation software (copyright 1994 by TGV Inc).
Chassis Interface.
1 EIP controller (6 Ethernet).
1 FSIP controller (8 Serial).
1 FEIP controller (2 FastEthernet).
6 Ethernet/IEEE 802.3 interfaces.
2 FastEthernet/IEEE 802.3 interfaces.
8 Serial network interfaces.
123K bytes of non-volatile configuration memory.

16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
8192K bytes of Flash internal SIMM (Sector size 256K).
No slave installed in slot 3.
Configuration register is 0x102


My config file has the following entry:

# Global settings:

WorkDir: d:\mrtg_graph
LoadMIBs: C:\mrtg\mibs\perfmib.mib, C:\mrtg\mibs\mib_ii.mib,
C:\mrtg\mibs\Perc.mib,C:\mrtg\mibs\dellserv.mib
IconDir: d:\mrtg_graph\images

Refresh: 300
Interval: 5
WriteExpires: yes 

Unscaled[_]: ymwd
Options[_]: bits,growright
YLegend[_]: Bits Per Second
ShortLegend[_]: b/s
LegendI[_]:  Bits/s:
LegendO[_]:  Bits/s:
WithPeak[_]: dwm

# Memory for MY_ROUTER01

Target[MY_ROUTER01.mem]:1.3.6.1.4.1.9.9.48.1.1.1.5.1&1.3.6.1.4.1.9.9.48.1.1.
1.6.1:pubcommun at MY_ROUTER01::1:2 
Directory[MY_ROUTER01.mem]: MY_ROUTER01
RouterUptime[MY_ROUTER01.mem]: pubcommun at MY_ROUTER01
MaxBytes[MY_ROUTER01.mem]: 56113080
PageTop[MY_ROUTER01.mem]: <H2>Memory Usage MYROUTER01 </H2>
Title[MY_ROUTER01.mem]: Memory Usage HARTRDMZ01
WithPeak[MY_ROUTER01.mem]:ymwd 
ShortLegend[MY_ROUTER01.mem]: b/s
XSize[MY_ROUTER01.mem]: 380
YSize[MY_ROUTER01.mem]: 100 
Legend1[MY_ROUTER01.mem]: Memory Used 
Legend2[MY_ROUTER01.mem]: Memory Free
Legend3[MY_ROUTER01.mem]: Maximal 5 Minute Memory Used
Legend4[MY_ROUTER01.mem]: Maximal 5 Minute Memory Free
LegendI[MY_ROUTER01.mem]: &nbsp;Used
LegendO[MY_ROUTER01.mem]: &nbsp;Free
Options[MY_ROUTER01.mem]: gauge, bits,growright


Thanks


Richard Billingsley,
HA/TMA Senior System/Network Engineer
Intuitive Systems Engineering, Incorporated
5111 Leesburg Pike
Skyline 5, Suite 302
Falls Church, VA 22041

Phone:  (703)820-5580
Fax:  (703)379-3961 
Helpdesk:  (703)824-8605
E-Mail:  Richard.Billingsley at tma.osd.mil


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org