[mrtg] Re: Monitoring ATM sub-interface problem
Nasreddine Tabet-Aoul
Nasreddine.Tabet-Aoul at madgeweb.com
Fri Nov 10 19:10:45 MET 2000
I Think depends on the version of the software the router. You need to have
version12.0x and over. I have run MRTG on version 11.X and version 12.X.
version 11.x do not provide stats on subinterfaces. version 12.x does.
-----Original Message-----
From: Wang Chen [mailto:wchen at dv2.com]
Sent: 10 November 2000 16:30
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Monitoring ATM sub-interface problem
Is there anybody successfully monitoring Cisco router ATM sub-interface at
sub-if level.
I have the output from aal5, but sub-if. We would like to monitoring trafic
of ATM sub-interface at
subif. Form mrtg.conf, we've got nosuchname error of SNMP. I realize the
MIB entry may not
there. The error like following:
Received SNMP response with error code
error status: noSuchName
index 1 (OID: 1.3.6.1.2.1.2.2.1.10.45)
SNMPv1_Session (remote host: "70.xxx.xxx.xx" [70.xxx.xxx.xx].161
community: "public"
request ID: 1272205763
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
SNMPGET Problem for ifInOctets.45 ifOutOctets.45 sysUptime sysName
ifDescr.45 on
public at 70.xxx.xxx.xx SNMPGET: Failed to reach target:
"mailto:45:public at 70.xxx.xxx.xx. I tried multiple tim
es! public at 70.xxx.xxx.xx
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~
Seems ifInOctets, ifOutOctOctets are not on the OID. Can anyone know the OID
for this sub-inter face.
Thank you in advance.
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list