[mrtg] HELP !!!!! 3660 Channelized E1 Timeslot problem

@ndylow andylow at webvisions.com
Sat Nov 11 05:04:51 MET 2000


I got a problem having my MRTG to monitor 2 timeslots, I have no problem for
1 timeslot. Below is what I get when I use the "snmpwalk" on my 3660 router:

interfaces.ifTable.ifEntry.ifDescr.7 = Serial1/0:0
interfaces.ifTable.ifEntry.ifDescr.8 = Serial1/0:1
interfaces.ifTable.ifEntry.ifDescr.9 = Serial1/0:2
interfaces.ifTable.ifEntry.ifDescr.10 = Serial1/0:3

As you can see above, S1/0:0 and S1/0:1 are 1 timeslot 64Kbps, there is no
problem for me by issuing the sentences:
Target[xxx]: 7:xxxxx at xxx.xxx.xxx.xxx
Target[xxx]: 8:xxxxx at xxx.xxx.xxx.xxx

I can see the graph perfectly!!

However, I cannot see the correct graph for 2 timeslots ( 128Kbps ), S1/0:2
and S1/0:3, by using the below sentences:
Target[xxx]: 9:xxxxx at xxx.xxx.xxx.xxx
Target[xxx]: 10:xxxxx at xxx.xxx.xxx.xxx

What I see is 2 straight lines, having one saturated at 56Kbps (incoming)
and one saturated at 64Kbps (outgoing).

I need to solve this ASAP, really appreciate if any good souls can give me
some guidance.

Thanks ahead!


Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

More information about the mrtg mailing list