[mrtg] APC Smart-UPS 1400 MIB?

[Jeff Liebermann]

 > Couldn't find one on their site, so thought I'd ask here... :-)

That's because the APC-1400 does not have a MIB.  It's the AP9605 PowerNet
SNMP adapter card that has the MIB.  You also have to be careful of the
firmware version of the AP9605.  Version 1.x and 2.x use the RFC1628
MIB, while version 3.x (3.0.2 is current) uses the PowerNet MIB.
Search the APCC web pile for "PowerNet".

See:
    ftp://ftp.apcc.com/apc/public/software/pnetmib/mib/  (????)
    http://www.wtcs.org/snmp4tpc/mibs.htm
    http://www.inotech.com/mibs/apc.html

You might find the following OID's useful.

Input Line Voltage
	1.3.6.1.4.1.318.1.1.1.3.2.1.0
Maximum Line Voltage
	1.3.6.1.4.1.318.1.1.1.3.2.2.0
Minimum Line Volage
	1.3.6.1.4.1.318.1.1.1.3.2.3.0
Output Line Voltage
	1.3.6.1.4.1.318.1.1.1.4.2.1.0
Output load as % of rating
	1.3.6.1.4.1.318.1.1.1.4.2.3.0
Output current (amps)
	1.3.6.1.4.1.318.1.1.1.4.2.4.0

Also, if you happen to have the older APC 1400RH (4ru) model, please
note that it sucks 100 watts of power just sitting there overcharging,
heating, and eventually killing the batteries.  Lousy design methinks.

Drivel:  Beware of anything that's smart, amazing, magic, miracle,
or other superlative.  They rarely are.

--
Jeff Liebermann 150 Felker St #D  Santa Cruz Ca 95060
(831)336-2558 voice (831)426-1240 fax (831)421-6491 pager
jeffl at comix.santa-cruz.ca.us  jeffl at cruzio.com


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi