[mrtg] Re: Inquiry

[Alex van den Bogaerdt]

Stephen Malenshek wrote:
> 
> I know I am probably doing somehting wrong and feel really stupid, but I am 
> having fits with this.  It is monitoring the Ethernet ports on this device 
> without a problem, but when I try to monitor the CPU, I get the following.

> SNMP Error:
> Received SNMP response with error code
>    error status: noSuchName
>    index 1 (OID: 1.3.6.1.4.1.9.2.1.57.0)

Connectivity is OK.  Community string is OK.  It therefore has to be
the OID that should be investigated.

I do not know the PIX so I can only give you some general tips:

- Consult the cisco web site and check that the PIX supports this OID

- try using snmpwalk (available all around the net) and walk the OID.
  this is the 1.3.6.1.4.1.9.2.1.57 part.  Perhaps you are using
  an OID that is correct, without specifying the correct instance

  example:
  [alex at home ~]$ snmpwalk router public .1.3.6.1.4.1.9.2.1.57
  enterprises.Cisco.2.1.57.0 = 10

  In my case, 0 is the right instance to use. 

regards,
-- 
   __________________________________________________________________
 / alex at slot.hollandcasino.nl                  alex at ergens.op.het.net \
| work                                                         private |
| My employer is capable of speaking therefore I speak only for myself |
+----------------------------------------------------------------------+
| Technical questions sent directly to me will be nuked. Use the list. | 
+----------------------------------------------------------------------+
| http://faq.mrtg.org/                                                 |
| http://rrdtool.eu.org  --> tutorial                                  |
+----------------------------------------------------------------------+

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi