[mrtg] Re: tuning MRTG for eg.CPU-Load

[Daniel R . Kilbourne]

Here is my complete config for my workstation.....


WorkDir: /home/httpd/html/MRTG/dan
LogFormat: rrdtool
PathAdd: /usr/local/bin
LibAdd: /usr/local/rrdtool-1.0.28/lib/perl


#---------------------------------------------------------------

Target[dan-eth0]: 2:string at workstation
MaxBytes[dan-eth0]: 1250000
Title[dan-eth0]: workstation : eth0
PageTop[dan-eth0]: Traffic Analysis for dan's eth0
Options[dan-eth0]: bits,growright

#---------------------------------------------------------------

Target[dan.mem]: 1.3.6.1.4.1.2021.4.6.0&1.3.6.1.4.1.2021.4.11.0:string at workstation
MaxBytes[dan.mem]: 192988
Title[dan.mem]: workstation memory
PageTop[dan.mem]: workstation memory
YLegend[dan.mem]: Memory
ShortLegend[dan.mem]: Memory
Legend1[dan.mem]: Mem in use
Legend2[dan.mem]: Free Memory
LegendI[dan.mem]: Mem in use
LegendO[dan.mem]: Free Memory
Options[dan.mem]: gauge,integer,growright

Target[dan.load]: 1.3.6.1.4.1.2021.10.1.3.2&1.3.6.1.4.1.2021.10.1.3.2:string at workstation * 100
MaxBytes[dan.load]: 10000000
Title[dan.load]: workstation load * 100 (5 minute)
PageTop[dan.load]: workstation load * 100 (5 minute)
YLegend[dan.load]: load
ShortLegend[dan.load]: load
Legend1[dan.load]: load
Options[dan.load]: gauge,nopercent,integer,growright

Target[dan.load1]: 1.3.6.1.4.1.2021.10.1.3.1&1.3.6.1.4.1.2021.10.1.3.1:string at workstation * 100
MaxBytes[dan.load1]: 10000000
Title[dan.load1]: workstation load * 100 (1 minute)
PageTop[dan.load1]: workstation load * 100 (1 minute)
YLegend[dan.load1]: load
ShortLegend[dan.load1]: load
Legend1[dan.load1]: load
Options[dan.load1]: gauge,nopercent,integer,growright

Target[dan.load15]: 1.3.6.1.4.1.2021.10.1.3.3&1.3.6.1.4.1.2021.10.1.3.3:string at workstation * 100
MaxBytes[dan.load15]: 10000000
Title[dan.load15]: workstation load * 100 (15 minute)
PageTop[dan.load15]: workstation load * 100 (15 minute)
YLegend[dan.load15]: load
ShortLegend[dan.load15]: load
Legend1[dan.load15]: load
Options[dan.load15]: gauge,nopercent,integer,growright




On Wed, Oct 04, 2000 at 09:18:44AM +0200, wagner at grz.at spake:

> 
> Is there any MRTG-example showing CPU-Load. Only entering the
> paramters from your website seems not to function. (
> http://faq.mrtg.org/FAQ006.html)
> 
> 
> I tried the following:
> 
> Target[router1.domain.at]: 1.3.6.1.4.1.9.2.1.58.0&1.3.6.1.4.1.9.2.1.58.0:public at router1
> Options[router1]: gauge
> Title[router1.domain.at]: router1.domain.at (CPU-Utilization):
> PageTop[router1.domain.at]: <H1>CPU Utilization for router1
>  </H1>
>  <TABLE>
>    <TR><TD>System:</TD><TD>router1.domain.at  - building A</TD></TR>
>    <TR><TD>Maintainer:</TD><TD>GRZ - Wagner Christoph</TD></TR>
>    <TR><TD>CPU:</TD><TD>Cisco7505-RSP1</TD></TR>
>   </TABLE>
> 
> PS: Is there no big example section on the web? My Opinion: I think it´s not useful that
> every person has to develop everything new. It consumes too much time, since I´m not
> only doing management tasks.
> 
> Anybody who can help me?
> 
> Kind regards,
> Chris
> 
> 
> 
> 
> 
> 
>                                                                     
>  An:     "'wagner at grz.at'"                                          
>          <wagner at grz.at>,                                           
>          mrtg at list.ee.ethz.ch                                       
>                                                                     
>  Kopie:                                                             
>                                                                     
>                                                                     
>                                                                     
>  Thema:  RE: [mrtg] tuning MRTG for       |-----------------------| 
>          eg.CPU-Load                      | [ ] Nicht Archivieren | 
>                                           |-----------------------| 
>  -------+--------------------------------+------------------------- 
> 
> 
> 
> 
> 
> > I have some questions concerning tuning the defaults:
> >
> > a) can I get a CPU-load graph for Cisco Routers
> >           (what information other than interface load can I display
> >           with MRTG??)
> http://faq.mrtg.org/FAQ006.html
> 
> > b) how is it possible to configure the graph (eg. to get an
> >           daily report over a whole week or an hourly report)
> ?
> 
> > c) can I configure the different timings of the snmp-requests
> >           for devices (eg. LAN-Router every 5 min, WAN router
> >           every 12min)
> http://ee-staff.ethz.ch/~oetiker/webtools/mrtg/config.html#interval
> 
> -gr
> 
> 
> 
> 
> 
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 

-- 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Daniel R. Kilbourne
daniel.kilbourne at voyager.net
Voyager.net Network Engineer

^^^^^^^^^^^^^^^^^^^^^^^^^^^^

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi