[mrtg] Re: APC Symmetra UPS

[Nicholas Ritter]

I am using UCD snmp on the mrtg box. I tried doing a 'snmpwalk -m all' and
also a 'snmpwalk -M /usr/share/snmp/mibs/' but both returned the same
output. I am beginning to think I have the wrong MIB from APC for the card
in the Matrix. I am using the powernet mib, and my .index file in
/usr/share/snmp/mibs/    lists the file. The only thing is, and I don't know
if this matters, but I don't have to of the RFC mibs that I see imported in
the powernet mib.

Through the data I get from the web/snmp card in the matrix, I see this
line:

system.sysDescr.0 = "APC Web/SNMP Management Card (MB:v3.0.2 PF:v1.0.1
PN:plat101.bin AF1:v1.0.1      AN1:appl101.bin MN: AP9606 HR: G9 SN:
WA9920002297 MD: 05/12/1999) (Embedded PowerNet SNMP Agent SW v2.2
compatible)"
system.sysObjectID.0 = OID:
enterprises.apc.products.system.matrixUPS.matrixUPS5000


This says to me that the card is in fact a powernet mib compliant board,
that and the fact that I can not find any other MIB files on APC's site.

Nicholas



> You don't say what snmp package you're using.  On FreeBSD I use
> ucd-snmpd.
>
> When walking the device, try either "-m all" OR set the environment
> variable MIBS=ALL to have snmpwalk pick up the MIB entries.
>
> If you're using another snmp package, figure out what they want for
> either specifying what MIB to use or what's involved in referencing all
> mibs.
>




--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi