[mrtg] problem with reading the two BRI interfaces on one graph

[Magdy Ibrahim]

Dear All,

After reading the decumentations about how to make mrtg read two interfeces
on one graph and I made it. I found that graph just read the two interfaces
and the output only give me reading of one interface.
How I can make mrtg to give me the adding of the two interfaces?

this is my configurations:

######################################################################
# Description: Cisco Internetwork Operating System Software IOS (tm) 2500
Software (C2500-I-L), Version 11.2(20), RELEASE SOFTWARE (fc1) Copyright (c)
1986-1999 by cisco Systems, Inc. Compiled Tue 05-Oct-99 12:00 by jaturner
#     Contact:
# System Name: purenet
#    Location:
#.....................................................................

Target[212.3.61.65.1]: 1:Purenet_snmp at 212.3.61.65
MaxBytes[212.3.61.65.1]: 8000
Title[212.3.61.65.1]: purenet (): BRI0
Options[212.3.61.65.1]: growright, bits
PageTop[212.3.61.65.1]: <H1>Traffic Analysis for BRI0
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>purenet in </TD></TR>
   <TR><TD>Maintainer:</TD><TD></TD></TR>
   <TR><TD>Interface:</TD><TD>BRI0 (1)</TD></TR>
   <TR><TD>IP:</TD><TD> ()</TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>8000.0 Bytes/s (ppp)</TD></TR>
  </TABLE>

#---------------------------------------------------------------

Target[212.3.61.65.2]: 2:Purenet_snmp at 212.3.61.65
MaxBytes[212.3.61.65.2]: 8000
Title[212.3.61.65.2]: purenet (): BRI0:1
Options[212.3.61.65.2]: growright, bits
PageTop[212.3.61.65.2]: <H1>Traffic Analysis for BRI0:1
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>purenet in </TD></TR>
   <TR><TD>Maintainer:</TD><TD></TD></TR>
   <TR><TD>Interface:</TD><TD>BRI0:1 (2)</TD></TR>
   <TR><TD>IP:</TD><TD> ()</TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>8000.0 Bytes/s (ppp)</TD></TR>
  </TABLE>

#---------------------------------------------------------------

Target[212.3.61.65.3]: 3:Purenet_snmp at 212.3.61.65
MaxBytes[212.3.61.65.3]: 8000
Title[212.3.61.65.3]: purenet (): BRI0:2
Options[212.3.61.65.3]: growright, bits
PageTop[212.3.61.65.3]: <H1>Traffic Analysis for BRI0:2
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>purenet in </TD></TR>
   <TR><TD>Maintainer:</TD><TD></TD></TR>
   <TR><TD>Interface:</TD><TD>BRI0:2 (3)</TD></TR>
   <TR><TD>IP:</TD><TD> ()</TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>8000.0 Bytes/s (ppp)</TD></TR>
  </TABLE>

#---------------------------------------------------------------

Target[212.3.61.65.00]: 2:Purenet_snmp at 212.3.61.65 +
3:Purenet_snmp at 212.3.61.65
MaxBytes[212.3.61.65.00]: 8000
Title[212.3.61.65.00]: purenet (): BRI0:2
Options[212.3.61.65.00]: growright, bits
PageTop[212.3.61.65.00]: <H1>Traffic Analysis for BRI0:2
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>purenet in </TD></TR>
   <TR><TD>Maintainer:</TD><TD></TD></TR>
   <TR><TD>Interface:</TD><TD>BRI0:2 (00)</TD></TR>
   <TR><TD>IP:</TD><TD> ()</TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>7000.0 Bytes/s (ppp)</TD></TR>
  </TABLE>

#---------------------------------------------------------------

Please reply soon.

Magdy Ibrahim
Purenetinternetworking


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi